PCB-106B
| basic data | |||
| (±2. 5 V output range) measuring range | 8.3 psi | 57.2 kPa | |
| sensitivity (±15%) | 300 mV / psi | 43.5 mV / kPa | |
| Maximum sudden change of pressure | 1,379 kPa | ||
| maximum pressure | 2 kpsi | 13.790 kPa | |
| Resolution | 0.0001 psi | 0,00069 kPa | [1] |
| Resonance frequency | ≥60.000 Hz | ||
| rise time | ≤ 9 µs | ||
| lower limiting frequency (-5%) | 0.5 Hz | ||
| linearity | ≤ 1% FS | [2] | |
| conditions | |||
| acceleration sensitivity | ≤ 0.002 psi/g | ≤ 0,0014 kPa/(m/s²) | |
| Temperature range (operation) | -65 … 250 ° F | -54 … 121 ° C | |
| Temperature coefficient of sensitivity | ≤0,05 %/°F | ≤0.09 %/°C | |
| Maximum shock (for fraction of a second) | 3,000 ° F | 1.649 ° C | |
| maximum shock resistance | 2,000 g pk | 19.600 m/s² pk | |
| Technical properties | |||
| Output polarity (positive pressure) | positive | ||
| Discharging charging time constant (at room temperature) | ≥ 1 s | ||
| power | 12 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 3 … 8 V DC | ||
| physical properties | |||
| geometry of the sensor element | compression principle | ||
| Sensor element | quartz | ||
| housing material | 304/304 L (stainless steel) | ||
| membrane | 316L (stainless steel) | ||
| sealing | hermetically sealed welded | ||
| Electrical connection | 10-32-coaxial socket | ||
| weight | 0.63 oz | 18.0 grams | |
| notes | |||
| [1] | Typically | ||
| [2] | zero-based balancing line, determined using the method of least squares | ||
| [3] | details: see PCBs Declaration of conformance PS023 | ||
| equipment | |||
| 060A12 | installation sleeve, 9/16-18 2A thread, 9/16 "hex | -1 | |
| 060A14 | Metric mounting sleeve, M14 x 1.25-6 g-thread, 14 mm hex, (stainless steel) | -1 | |
| 065A37 | gasket, 0,497 "outside x 0,437" x 0.025 "tall, brass | 3 | |
| (E) Emralon coating | |||
| coating | Emralon | ||
| electrical insulation | >100 MΩ | ||
| Accessories supplied | |||
| 065A47 | gasket, 0,497 "outside x 0,437" x 0.025 "high, Acetal | 3 | |
| (T) TEDS memory according to IEEE PP1451. 4 | |||
| Bias voltage | 3.7 … 8.7 V DC | ||
| (W) waterproof cable connection | |||
| Accessories supplied | |||
| 060A12 | installation sleeve, 9/16-18 2A thread, 9/16 "hex | -1 | |
| (WM) waterproof cable connection | |||
| included Accessories | |||
| 060A14 | metric mounting sleeve, M14 x 1.25-6 g-thread, 14 mm hex, (stainless steel) | -1 |
PCB-106B
