PCB-200B03

PCB-200B03

  • ICP® sensor for power measurement,
  • Measuring range 2.224 N,
  • Sensitivity 2,2 mV / N,
  • Frequency range 0.0003 … 75,000 Hz,
  • 10-32 female connector on the side
  • ,
    basic data
    sensitivity (±15%)10 mV / lb2.248,2 mV / kN
    measuring range (pressure)500 lb2,224 kN
    Maximum permissible static load (force)3,000 lb13,345 kN
    wide band resolution0.01 lb RMS0,0445 N RMS[1]
    Lower limiting frequency (-5%)0.0003 Hz[3]
    upper frequency limit75,000 Hz[4]
    linearity error≤ 1% FS[2]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C
    temperature coefficient Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C
    technical properties
    discharge charge time constant (at room temperature)≥ 2,000 s
    Supply20 … 30 V DC
    Konstantstromversorgung2 … 20 mA
    output impedance≤ 100 Ω
    Bias voltage8 … 14 V DC
    (Pressure) output polaritypositive
    physical properties
    stiffness11 lb/µin1.9 kN/µm[1]
    size - diameter0,650 in16.51 mm
    size - height0.360 in9.14 mm
    Size - diameter of the measuring surface0.500 in12.7 mm
    mass0.5 oz14 grams
    parts usematerialstainless steel
    sealinghermetically sealed
    electrical connection10-32-coaxial socket
    Connection positionside
    mounting thread10-32 female thread
    notes
    [1]Typically
    [2]zero-based balancing line, determined using the method of least squares
    [3]calculated on the basis of discharging charging time constant
    [4]suppose value determined on the basis of solid state Dynamics calculations
    [5]details: see PCBs Declaration of Conformance PS023
    equipment
    080A81adhesive for thread lock-1
    081 B 05Mounting bolts (10-32 on 10-32)-1
    084A83impact plate-1
    M081A62mounting bolts, 10-32 to M6 x 1, BeCu, with shoulder-1
    (S) negative output polarity
    (W) waterproof cable
    wiringsealed Cable
    cable exitside

    6 other articles of the same category: