PCB-(M)103B12

PCB-(M)103B12

  • ICP® pressure sensor with stainless steel membrane,
  • For turbulence measurements,
  • Measuring range 68.6 kPa (190.7 dB),
  • Sensitivity 72.5 mV / kPa,
  • Lower limiting frequency 0.5 Hz,
  • 10-32 female connector

basic data
Measurement range (output range ± 5 V)10 psi190.7 dB
Usable overload range (output range is ± 10 V)20 psi196.7 dB[1]
Sensitivity (± 15%)500 mV / psi72.5 mV / kPa
maximum pressure250 psi1724 kPa
resolution0.06 mpsi86.3 dB
resonant frequency≥13.000 Hz
rise time≤25 microseconds
Lower limit frequency (-5%)5 Hz
linearity error≤2,0% FS[2]
Operating conditions
acceleration sensitivity≤0,0005 psi / g≤0,0035 kPa / (m / s)
The temperature range (operation)-100 ... 250 ° F-73 ... 121 ° C
Temperature coefficient of sensitivity≤0,2% / ° F≤0,36% / ° C
Maximum temperature shock (for split second)1000 ° F538 ° C
Maximum shock resistance1.000 g pk9807 m / s pk
Technical characteristics
Output polarity (positive pressure)positive
Discharging time (at room temperature)≤0,1 s
supply voltage20 ... 30 V DC
Constant current supply2 ... 20 mA
output impedance≤100 Ω
Bias voltage7 ... 13 V DC
physical properties
sensor elementceramics
housing materialstainless steel
membrane316L (stainless steel)
sealHermetically sealed
electrical connection10-32 coaxial
Dimensions0.11 oz3.15 grams
Hints
[1]For an output range up to 10 V, the supply voltage at least 24 V has to DC , respectively. At low bias voltage of the sensor, no negative output range up to -10 V can be used.
[2]Zero-based line of best fit, determined by the method of least squares
[3]Details: see PCB Declaration of Conformance PS023
included supply
060A10Mounting sleeve, 1/2 "-20-2A thread, 7/16" hex-1
065A66Adhesive mounting ring-3
160-0.242-00O-ring-3
(M) Metric assembly
included supply
060A24Mounting sleeve, M14 x 1,25-6G thread, 11 mm hexagon, material: 17-4 (stainless steel)-1

30 other articles of the same category: