PCB-(M)121A23
| basic data | |||
| measuring range (±5 V output range) | 5,000 psi | 34.473 kPa | |
| sensitivity (±20%) | 1 mV / psi | 0.145 mV / kPa | |
| Maximum pressure (total) | 7,200 psi | kPa 49.642 | |
| resolution | 0.04 psi | 0.276 kPa | |
| Resonance frequency | ≥ 200.000 Hz | ||
| rise time (reflected pressure) | ? 2.5 µs | ||
| lower limiting frequency (-5%) | 0.005 Hz | ||
| linearity | ≤2% FS | [1] | |
| conditions | |||
| acceleration sensitivity | ? 0.2 psi/g | ? 0.14 kPa/(m/s²) | |
| temperature range (operation) | -65 … 250 ° F | -54 … 121 ° C | |
| Temperature coefficient of sensitivity | ≤ 0.08 %/°F | ? 0,1?4 %/°C | |
| technical features | |||
| output polarity (positive pressure) | positive | ||
| Discharge charge time constant (at room temperature) | ≤100 Ω | ||
| supply | 20 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 8 … 12 V DC | ||
| Electrical insulation | ≥100 MΩ | ||
| physical properties | |||
| geometry of the sensor element | compression principle | ||
| Sensor element | quartz | ||
| housing material | stainless steel | ||
| membrane | Stainless steel | ||
| sealing | hermetically sealed welded | ||
| electrical connection | 2-pin connector (MIL-C-5015) | ||
| Dimensions | 2.08 oz | 59 grams | |
| notes | |||
| [1] | zero-based balancing line, determined using the method of least squares | ||
| [2] | details: see PCBs Declaration of conformance PS023 | ||
| (M) metric mounting | |||
| (total) maximum pressure | 10,000 psi | kPa 68.947 | |
| Equipment | |||
| 065A15 | seal, 0,624 "outside x 0,553" x 0.080 "tall, brass | 3 |
PCB-(M)121A23
