PCB-113B38
zoom_out_map

PCB-113B38

  • ICP® high frequency pressure sensor with INVAR-membrane /-housing,
  • Especially insensitive to temperature transients,
  • Beschleunigungskompensiert,
  • Measuring range 344,7 kPa,
  • Sensitivity 14.5 mV / kPa,
  • Lower limiting frequency 1.0 Hz,
  • 10-32 female connector
  • of of
    basic data
    measuring range (±5 V output range) 50 psi 344.7 kPa
    usable range (output range ±10 V) 100 psi 689,4 kPa [2]
    sensitivity (±15%) ≥ 100 MΩ / psi 14.5 mV / kPa
    maximum pressure 1,000 psi 6.895 kPa
    Resolution 0.001 psi 0.007 kPa
    resonance frequency ≥ 400,000 Hz ≥ 500, 000 Hz
    Rise time ≤ 1.0 µs
    lower limiting frequency1.0 Hz
    linearity ≤ 1.0% FS [1]
    Conditions of use
    acceleration sensitivity ≤ 0.002 psi/g ≤ 0,0014 kPa/(m/s²)
    temperature range (operation) -100 … 275 ° F -73 … 135 ° C
    Temperature coefficient of sensitivity ≤ 0,1 %/°F ≤ 0.18 %/°C
    maximum Thermal shock (for fraction of a second) 3,000 ° F 1.649 ° C
    maximum acceleration2,000 g pk 19.614 m/s² pk
    Maximum shock resistance 20,000 g pk 196.140 m/s² pk
    Technical features
    output polarity (positive pressure) positive
    discharging charging time constant (at room temperature) 0.5 … 1.0 s
    Supply 20 … 30 V DC
    constant power supply 2 … 20 mA
    output impedance < 100 Ω
    Bias voltage 10 … 15 V DC
    Physical properties
    geometry of the sensor element compression principle
    sensor element quartz
    Goäusematerial INVAR
    membrane INVAR
    sealing hermetically sealed welded
    Electrical connection 10-32-coaxial socket
    dimensions (with mounting sleeve) 0.2 oz 6.0 grams
    notes
    [1] zero-based balancing line, determined using the method of least squares
    [2] for output range supply voltage up to 10 V must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.
    [3] details: see PCBs Declaration of conformance PS023
    equipment
    060A03 installation sleeve, 5 /. 16-24-2A thread, 1/4 "hex, (stainless steel) -1
    060A05 installation sleeve, M7 x 0.75-6 g-thread -1
    065A02 sealing ring f for flush mounting, 0,248 "outside x 0.219" x 0.015 "tall, brass 3
    PCB-113B38

    Specific References

    Download

    113B38_drawing.PDF

    Technical drawing

    Download (173.22k)

    113B38_manual.PDF

    Operating instructions

    Download (303.42k)

    113B38_specs.PDF

    Technical data sheet

    Download (31.6k)