PCB-113B33
zoom_out_map

PCB-113B33

  • ICP® high frequency pressure sensor with INVAR-membrane /-housing,
  • Especially insensitive to temperature transients,
  • Beschleunigungskompensiert,
  • Measuring range 68.950 kPa,
  • Sensitivity 0.073 mV / kPa,
  • Lower limiting frequency 1.0 Hz,
  • 10-32 female connector
  •  

    basic data
    measuring range (±5 V output range) 10,000 psi kPa 68.950  
     
    sensitivity (±10%) /0.5 mV / psi 0.073 mV / kPa  
     
    Maximum pressure 15,000 psi kPa 103.420  
     
    resolution 50 mpsi 0.345 kPa  
     
    Resonance frequency ≥400,000 Hz    
     
    rise time (reflected pressure) ≤ 1.5 µs    
     
    lower limiting frequency 1.0 Hz    
     
    Linearity ≤1.0% FS   [1]
    conditions
    acceleration sensitivity ≤ 0.002 psi/g ≤ 0,0014 kPa/(m/s²)  
     
    temperature range (operation) -100 … 275 ° F -73 … 135 ° C  
     
    Temperature coefficient of sensitivity ≤ 0,1 %/°F ≤0.18 %/°C  
     
    Maximum shock (for fraction of a second) 3,000 ° F 1,650 ° C  
     
    maximum acceleration 2.000 g PK 19.614 m/s² pk  
     
    Maximum shock resistance 20,000 g pk 196.140 m/s² pk  
    Technical characteristics
    Output polarity (positive pressure) positive    
     
    Discharging charging time constant (at room temperature) 0.5 ≥ 1.0 s    
     
    supply 20 … 30 V DC    
     
    Constant power supply 2 … 20 mA    
     
    output impedance ≤100 Ω    
     
    Bias voltage 8 … 14 V DC    
    Physical properties
    Geometry of the sensor element compression principle    
     
    Sensor element quartz    
     
    housing material INVAR    
     
    membrane INVAR    
     
    Sealing Hermetically sealed welded    
     
    Electrical connection 10-32-coaxial socket    
     
    mass 0.2 oz 6.0 grams  
    notes
    [1] zero-based balancing line, determined using the method of least squares    
     
    [2] details: see PCBs Declaration of conformance PS023    
    equipment
    060A03 installation sleeve, 5/16-24-2A thread, 1/4 " Allen, (stainless steel) -1  
     
    060A05 installation sleeve, M7 x 0.75-6 g-thread -1  
     
    065A02 sealing ring for flush mounting,. 0,248 "outside x 0.219" x 0.015 "high brass 3  
     
    065A05 gasket spacer, 0,248" outside x 0,221 "x 0.240" high, 17-4 (Stainless steel) -1  
    (S) Emralon coating
    coating Emralon    
     
    electrical insulation >100 MΩ    
     
    Equipment      
     
    065A08 insulation ring, 0.250 "outside x 0,218" x 0.027 "high, anodized aluminium 3  
     
    065A22 seal, 0.250" x outside 0,218 "x 0.015" high, Torlon or Vespel 3  
    (W) waterproof cable
    equipment      
     
    060A03 Mounting sleeve, 5/16-24-2A thread, 1/4 "hex, (stainless steel) -1  
    (WM) waterproof cable connection
    equipment      
     
    060A05 installation sleeve, M7 x 0.75-6 g-thread -1  
    PCB-113B33

    Specific References

    Download

    113B33_drawing.PDF

    Technical drawing

    Download (173.22k)

    113B33_manual.PDF

    Operating instructions

    Download (303.07k)

    113B33_specs.PDF

    Technical data sheet

    Download (31.26k)