PCB-111A23
| basic data | |||
| measuring range (±5 V output range) | 10,000 psi | kPa 68.950 | |
| sensitivity (±0, 05 mV / psi) | 0.5 mV / psi | 0.07 mV /. kPa | |
| maximum pressure | 15,000 psi | kPa 103.420 | |
| resolution | 0.2 psi | 1.4 kPa | |
| Resonance frequency | ≥400,000 Hz | ||
| rise time (reflected pressure) | ≤ 1.5 µs | ||
| lower limiting frequency (-5%) | 0.0005 Hz | ||
| linearity | ≤2.0% FS | [1] | |
| conditions | |||
| acceleration sensitivity | ≤ 0.002 psi/g | >0,0014 kPa/(m/s²) | |
| temperature range (operation) | -100 … 275 ° F | -73 … 135 ° C | |
| Temperature coefficient of sensitivity | ≤0,2 %/°F | ≤0.06 %/°C | |
| maximum acceleration | 2,000 g pk | 19.614 m/s² PK | |
| Maximum shock resistance | 20,000 g pk | 196.140 m/s² pk | |
| Technical characteristics | |||
| Output polarity (positive pressure) | positive | ||
| Discharging charging time constant (at room temperature) | ≥ 1,000 s | ||
| supply | 20 … 30 V DC | ||
| Constant power supply | 2 … 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 8 … 14 V DC | ||
| Physical properties | |||
| geometry of the sensor element | compression principle | ||
| sensor element | quartz | ||
| Housing material | 17-4 (Stainless steel) | ||
| membrane | INVAR | ||
| sealing | hermetically sealed welded | ||
| 3 | |||
| 065A08 | insulation ring, 0.250" x outside 0,218 "x 0.027" high, anodized aluminium | 3 | |
| (S) Stainless steel diaphragm | |||
| diaphragm | 316 L (stainless steel) |
PCB-111A23
