PCB-(M)103B12
- ICP® pressure sensor with stainless steel membrane,
- For turbulence measurements,
- Measuring range 68.6 kPa (190.7 dB),
- Sensitivity 72.5 mV / kPa,
- Lower limiting frequency 0.5 Hz,
- 10-32 female connector
| basic data | |||
| Measurement range (output range ± 5 V) | 10 psi | 190.7 dB | |
| Usable overload range (output range is ± 10 V) | 20 psi | 196.7 dB | [1] |
| Sensitivity (± 15%) | 500 mV / psi | 72.5 mV / kPa | |
| maximum pressure | 250 psi | 1724 kPa | |
| resolution | 0.06 mpsi | 86.3 dB | |
| resonant frequency | ≥13.000 Hz | ||
| rise time | ≤25 microseconds | ||
| Lower limit frequency (-5%) | 5 Hz | ||
| linearity error | ≤2,0% FS | [2] | |
| Operating conditions | |||
| acceleration sensitivity | ≤0,0005 psi / g | ≤0,0035 kPa / (m / s) | |
| The temperature range (operation) | -100 ... 250 ° F | -73 ... 121 ° C | |
| Temperature coefficient of sensitivity | ≤0,2% / ° F | ≤0,36% / ° C | |
| Maximum temperature shock (for split second) | 1000 ° F | 538 ° C | |
| Maximum shock resistance | 1.000 g pk | 9807 m / s pk | |
| Technical characteristics | |||
| Output polarity (positive pressure) | positive | ||
| Discharging time (at room temperature) | ≤0,1 s | ||
| supply voltage | 20 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 7 ... 13 V DC | ||
| physical properties | |||
| sensor element | ceramics | ||
| housing material | stainless steel | ||
| membrane | 316L (stainless steel) | ||
| seal | Hermetically sealed | ||
| electrical connection | 10-32 coaxial | ||
| Dimensions | 0.11 oz | 3.15 grams | |
| Hints | |||
| [1] | For an output range up to 10 V, the supply voltage at least 24 V has to DC , respectively. At low bias voltage of the sensor, no negative output range up to -10 V can be used. | ||
| [2] | Zero-based line of best fit, determined by the method of least squares | ||
| [3] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | |||
| 060A10 | Mounting sleeve, 1/2 "-20-2A thread, 7/16" hex | -1 | |
| 065A66 | Adhesive mounting ring | -3 | |
| 160-0.242-00 | O-ring | -3 | |
| (M) Metric assembly | |||
| included supply | |||
| 060A24 | Mounting sleeve, M14 x 1,25-6G thread, 11 mm hexagon, material: 17-4 (stainless steel) | -1 |
PCB-(M)103B12
