PCB-(M)103B01
zoom_out_map

PCB-(M)103B01

  • ICP® pressure sensor with stainless steel membrane,
  • For turbulence measurements,
  • Measuring range 20.7 kPa (180.3 dB),
  • Sensitivity 217.5 mV / kPa,
  • Lower limiting frequency 0.5 Hz,
  • Integrated cable, length 38 cm,
    ending on stripped and tinned ends
  • basic data
    measuring range 3.00 psi 180.3 dB  
     
    usable range 6.00 psi 186.3 dB [1]
     
    Sensitivity (±15%) 1,500 mV / psi 217.5 mV / kPa  
     
    maximum pressure 250 psi 1.724 kPa  
     
    resolution psi 0.00002 77 dB  
     
    resonance frequency ≥ 13,000 Hz    
     
    rise time ≤ 25 µs    
     
    Lower limiting frequency (-5%) 5 Hz    
     
    linearity ≤2.0% FS   [2]
    conditions
    Acceleration sensitivity ? 0.0005 psi/g ? 0.0035 kPa/(m/s²)  
     
    temperature range (operation) -100 … 250 ° F -73 … 121 ° C  
     
    Temperature coefficient of sensitivity ≤0,2 %/°F ≤0.06 %/°C  
     
    maximum shock (for fraction of a second) 1,000 ° F 538 ° C  
     
    Maximum shock resistance 1,000 g pk 9.807 m/s² pk  
    Technical properties
    discharge charge time constant (at room temperature) ? 0,1 s    
     
    supply 20 … 30 V DC    
     
    Constant power supply 2 … 20 mA    
     
    output impedance ≤100 Ω    
     
    Bias voltage 7 … 13 V DC    
    Physical properties
    sensor element ceramic    
     
    housing material stainless steel    
     
    Diaphragm 316 L (stainless steel)    
     
    waterproofing epoxy resin    
     
    electrical connection integrated cable    
     
    Cable termination tinned ends    
     
    mass 0.115 oz 3,260 grams  
     
    Type of cable stranded wires, 32 AWG    
     
    cable 15 in 38.1 cm  
    notes
    [1] for a Output range up to 10 V, the supply voltage must be at least 24 V DC. At low bias voltage of the sensor, no negative output range is usable up to-10 V.    
     
    [2] zero-based balancing line, determined using the method of least squares    
    equipment
    061A04 clamp 2  
     
    065A66 adhesive mounting ring -3  
    (M) metric mounting
    equipment      
     
    M061A04 Terminal -2  
    PCB-(M)103B01

    Specific References

    Download

    103B01_drawing.PDF

    Technical drawing

    Download (204.76k)

    103B01_manual.PDF

    Operating instructions

    Download (346k)

    103B01_specs.PDF

    Technical data sheet

    Download (23.36k)