PCB-(M)102M205
zoom_out_map

PCB-(M)102M205

  • ICP® pressure sensor with stainless steel membrane,
  • Beschleunigungskompensiert,
  • Measuring range 689,5 kPa,
  • Sensitivity 7.25 mV / kPa,
  • Lower limiting frequency 0.5 Hz,
  • 10-32 female connector
  •  

    basic data
    measuring range (±5 V output range) 100 psi kPa 689,5  
     
    usable range (output range ±10 V) 1,379 kPa [3]
     
    sensitivity (± 10 mV/psi) 50 mV / psi 7.25 mV / kPa  
     
    maximum pressure 500 psi 3 448 kPa  
     
    Resolution 0.002 psi 0 kPa 0.138  
     
    resonance frequency ≥250,000 Hz    
     
    rise time ≤ 2 µs    
     
    lower limiting frequency (-5%) 0.50 Hz    
     
    linearity ≤ 1% FS   [2]
    Conditions of use
    Acceleration sensitivity ≤ 0.002 psi/g ≤ 0.014 kPa/(m/s²)  
     
    Temperature range (operation) -100 … 275 ° F -73 … 135 ° C  
     
    Temperature coefficient of sensitivity ≤0,1 %/°F ≤ 0.18% / ° C  
     
    maximum shock (for fraction of a second) 3,000° F 1 649 ° C  
     
    maximum acceleration 2,000 g pk 19 614 m/s 2 pk  
     
    Maximum shock resistance 20,000 g pk 196 140 m/s 2 pk  
    Technical properties
    Output polarity (positive pressure) positive    
     
    Discharging charging time constant (at room temperature) ≥ 1 s    
     
    supply 20 … 30 V DC    
     
    Constant power supply 2 … 20 mA    
     
    Bias voltage 8 … 14 V DC    
    Physical properties
    sensor element quartz    
     
    housing material 17-4 (Stainless steel)    
     
    Diaphragm 316 L (stainless steel)   [1]
     
    sealing hermetically sealed welded    
     
    electricPort 10-32-coaxial socket    
     
    mass 0.4 oz 11 grams  
    notes
    [1] membrane with ablativer coating    
     
    [2] zero-based balancing line, determined using the method of least squares    
     
    [3] for output range up to 10 V that must DC be at least 24 V supply voltage. At low bias voltage of the sensor, no negative output range is usable up to-10 V.    
     
    [4] details: see PCBs Declaration of conformance PS023    
    equipment
    065A44 sealing ring, 0.435 "au need x 0,377 "x 0.030" high, copper 3  
    (M) metric mounting
    equipment      
     
    065A40 Seal ring, 0.435 "outside x 0,397" x 0.030 "tall, brass 3  
    PCB-(M)102M205

    Specific References

    Download

    102M205_drawing.PDF

    Technical drawing

    Download (84.82k)

    102M205_manual.PDF

    Operating instructions

    Download (349.46k)

    102M205_specs.PDF

    Technical data sheet

    Download (142.25k)