This website uses cookies, which are necessary for the technical operation of the site and which are always set. In order to further improve our offer and our website, we would like to set additional cookies in order to collect anonymized data for statistics and analyzes. However, these are only set with your consent. Further information on cookies can be found in our privacy policy.

Privacy policy Acceptdone
    PCB-(M)102B18
    zoom_out_map

      PCB-(M)102B18

    • ICP® pressure sensor with INVAR-membrane,
    • Masseisoliert,
    • Beschleunigungskompensiert,
    • Measuring range 344,7 kPa,
    • Sensitivity 14.5 mV / kPa,
    • Lower limiting frequency 0.5 Hz,
    • 10-32 female connector

      •  

      basic data
      measuring range (±5 V output range)50 psi344.7 kPa 
       
      usable range (output range ±10 V)100 psi689,4 kPa[1]
       
      sensitivity (±15%)14.5 mV / kPa 
       
      maximum static pressure1,000 psi6.895 kPa 
       
      Resolution1.0 mpsi0.007 kPa[2]
       
      resonance frequency≥ 500, 000 Hz  
       
      rise time (reflected pressure)≤ 1.0 µs  
       
      lower limiting frequency (-5%)0.5 Hz  
       
      linearity≤1.0% FS [3]
      conditions
      acceleration sensitivity≤ 0.002 psi/g≤ 0,0014 kPa/(m/s²) 
       
      temperature range (operation)-100 … 275 ° F-73 … 135 ° C 
       
      Temperature coefficient of sensitivity≤ 0.03 %/°F≤ 0,054 %/°C[2]
       
      Maximum shock (f &)menu; r fraction of a second)3,000 ° F1,650 ° C 
       
      maximum acceleration2,000 g pk19.600 m/s² PK 
       
      Maximum shock resistance20,000 g pk196,000 m/s² pk 
      Technical characteristics
      Output polarity (positive pressure)positive  
       
      Discharging charging time constant (at room temperature)≥ 1.0 s  
       
      power22 … 30 V DC  
       
      Constant power supply2 … 20 mA  
       
      output impedance< 100Ω  
       
      Bias voltage8 … 14 V DC  
       
      electrical insulation100 MΩ 
      -physical Properties
      geometry of the sensor elementcompression principle  
       
      Sensor elementquartz  
       
      housing materialstainless steel  
       
      membraneINVAR  
       
      Sealinghermetically sealed welded  
       
      electrical connection10-32-coaxial socket  
       
      Mass0.50 oz14.3 grams 
      notes
      [1]for output range up to 10 V, the supply voltage must at least 24 V DC be. At low bias voltage of the sensor, no negative output range is usable up to-10 V.  
       
      [2]typically  
       
      [3]zero-based balancing line, determined using the method of least squares  
       
      [4]details: see PCBs Declaration of conformance PS023  
      equipment
      065A03sealing ring, 0.435 "outside x 0,377" x 0.030 "high brass3 
      (M) metric mounting
      Accessories   
       
      065A40sealing ring, 0.435 "outside x 0,397" x 0.030 "high brass3 
      (S) stainless steel diaphragm
          
      PCB-(M)102B18

      Specific References

      Download

      102B18_drawing.PDF

      Technical drawing

      Download (78.87k)

      102B18_manual.PDF

      Operating instructions

      Download (428.16k)

      102B18_specs.PDF

      Technical data sheet

      Download (255.85k)