PCB-66332APZ1
- ICP® vibration sensor for OEM applications,
- TO-8 package,
- Suitable for PCB mounting,
- Measuring range 5 g,
- Sensitivity 1,000 mV / g,
- Frequency range 0.25 … 5,000 Hz,
- One-point calibration at 100 Hz,
- Connection pins below
| basic data | |||
| Sensitivity (± 20%) | 1,000 mV / g | 102 mV / (m / s) | [1] [2] |
| measuring range | 5 g | 50 m / s² | |
| Frequency range (± 3 dB) | 0.25 ... 5000 Hz | [3] [6] | |
| resonant frequency | > 16,000 Hz | [3] | |
| Broadband resolution | 38 ug RMS | 373 .mu.m / s RMS | [5] |
| linearity error | ≤1% | [4] | |
| Lateral acceleration sensitivity | ≥7% | ||
| Operating conditions | |||
| Overload limit (shock) | 5000 g pk | 49k m / s pk | |
| The temperature range (operation) | -65 ... 185 ° F | -54 ... 85 ° C | |
| Technical characteristics | |||
| Settling time (on the bias voltage ± 1%) | ≥30 s | ||
| discharging | ≤0,65 s | ||
| supply voltage | 18 ... 28 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | <550Ω | ||
| Bias voltage (± 10%) | 8 ... 12 V DC | ||
| Spectral noise (10 Hz) | 1.9 µg/√Hz | 18.6 (µm/s²)/√Hz | [5] |
| Spectral noise (100 Hz) | 0.6 µg/√Hz | 5.9 (µm/s²)/√Hz | [5] |
| Spectral noise (1,000 Hz) | 0.4 µg/√Hz | 3.9 (µm/s²)/√Hz | [5] |
| physical properties | |||
| Size - diameter of the base | 0.64 in | 16.3 mm | |
| Size - Height | 0.57 in | 14.5 mm | |
| Dimensions | 0.88 oz | 25 grams | |
| attachment | Adhesive mounting / soldering | ||
| sensor element | ceramics | ||
| Geometry of the sensor element | shear principle | ||
| housing material | stainless steel | ||
| seal | Hermetically sealed | ||
| electrical connection | soldering pins | ||
| connection | Below | ||
| Pin assignments (pin 1) | Signal / power supply | ||
| Pin assignment (pin 2) | Dimensions | ||
| Pin assignment (pin 3) | No function | ||
| Hints | |||
| [1] | Conversion factor 1 g = 9,81 m / s² | ||
| [2] | Positive output signal when acceleration in the Z direction (in solder mounting: positive output signal during acceleration up) | ||
| [3] | Depending on the installation | ||
| [4] | Zero-based line of best fit, determined by the method of least squares | ||
| [5] | typically, | ||
| [6] | Tolerance of the upper limit frequency: ± 10% | ||
| [7] | Details: see PCB Declaration of Conformance PS023 and PS060 | ||
| included supply | |||
| ICS-2 | One-point calibration at 100 Hz (NIST traceable) | -1 | |
| (HT) High temperature electronics | |||
| The temperature range (operation) | -65 ... 250 ° F | -54 ... 121 ° C |
PCB-66332APZ1
