PCB-66212APZ1
| basic data | |||
| sensitivity (±20%) | 100 mV/g | 10.2 mV/(m/s²) | [1] [2] |
| measuring range | 50 Ω | 490 m/s² | |
| Frequency range (± 3 dB) | 0,5 … 10,000 Hz | [3] [6] | |
| resonance frequency | > 25,000 Hz | [3] | |
| Wide band resolution | 350 µg RMS | 3.434 µm / s ² RMS | [5] |
| linearity error | ≤ 1% | [4] | |
| transverse acceleration sensitivity | ≤ 7% | ||
| conditions | |||
| Overload limit (shock) | 5,000 g pk | 49,050 m/s² pk | |
| temperature range (operation) | 65 … 185 ° F | -54 … 84 ° C | |
| technical characteristics | |||
| settling time (on bias voltage ± 1%) | ≤ 2 s | ||
| Discharge charge time constant | ≥ 0.3 s | ||
| Power | 18 … 28 V DC | ||
| constant power supply | 2 … 20 mA | ||
| Output impedance | < 150 Ω | ||
| bias voltage (±10%) | 8 … 12 V DC | ||
| Spectral noise (10 Hz) | 8 µg / √ Hz | 78,50 (µm / s ²) / √ Hz | [5] |
| spectral noise (100 Hz) | 5 µg /. √ Hz | 49,1 (µm / s ²) / √ Hz | [5] |
| spectral noise (1,000 Hz) | 4 µg / √ Hz | 39.2 (µm / s ²) / √ Hz | [5] |
| -physical Properties | |||
| size - diameter of the footprint | 0.36 in | 9.1 mm | |
| size - height | 0.38 in | 9.7 mm | |
| Mass | 0.01 oz | 3 grams | |
| attachment | Bonding/soldering | ||
| sensor element | ceramic | ||
| Geometry of the sensor element | Shear principle | ||
| Housing material | stainless steel | ||
| sealing | hermetically sealed welded | ||
| Electrical connections | soldering pins | ||
| Connection | down | ||
| pin assigNment (pin 1) | Signal/power | ||
| pin assigNment (pin 2) | Mass | ||
| pin assigNment (PIN 3) | no function | ||
| notes | |||
| [1] | conversion factor 1 g = 9.81 m/s² | ||
| [2] | positive output signal during acceleration in Z-direction < br(bei Lötmontage: positives Ausgangssignal bei Beschleunigung nach oben) | ||
| [3] | Depending on the installation | ||
| [4] | zero-based balancing line, determined using the method of least squares | ||
| [5] | Typically | ||
| [6] | the upper cut-off frequency tolerance: ±10% | ||
| [7] | details: see PCBs Declaration of conformance PS023 and PS060 | ||
| Accessories | |||
| ICS-2 | single point calibration at 100 Hz (traceable to NIST) | -1 | |
| (HT) high temperature electronics | |||
| temperature range (operation) | -65 … 250 ° F | -54 … 121 ° C |
PCB-66212APZ1
