PCB-(M)605B61
zoom_out_map

PCB-(M)605B61

  • Biaxialer industrial ICP® vibration sensor,
  • With through hole,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 5,000 Hz,
  • One-point calibration at 100 Hz,
  • Integrated armored cable, length 3 m,
    ending on cut end
  • "
    basic data
    sensitivity (±20%) 100 mV/g 10.2 mV/(m/s²) [5]
    measuring range ±50 g ±490 m / s²
    Frequency range (± 3 dB) 30 … 300,000 cpm 0.5 … 5,000 Hz
    resonance frequency 600 kcpm 10,000 Hz [1]
    Wide band resolution 350 µg 3.434 µm / s ² [1]
    linearity ≤1% [4]
    Transverse acceleration sensitivity ≤ 5%
    Conditions of use
    Overload limit (shock) 5,000 g pk 49,050 m/s² pk
    Temperature range -65 … 250 ° F -54 … 121 ° C
    protection class IP68
    Technical characteristics
    settling time (on bias voltage ± 1%) ≤ 2.0 s
    discharging charging time constant ≥ 0.3 s
    Power 18 … 28 V DC
    constant power supply 2 … 20 mA
    Output impedance < 150 Ω
    Bias voltage 8 … 12 V DC
    Spectral noise (10 Hz) 8 µg / √ Hz 78.5 (µm / s ²) / √ Hz [1]
    spectral noise (100 Hz) 5 µg / √ Hz 49,1 ( µm / s ²) / √ Hz [1]
    spectral noise (1,000 Hz) 4 µg / √ Hz 39.2 (µm / s ²) / √ Hz [1]
    electrical insulation (Housing) ≥ 100 MΩ
    Physical properties
    size - diameter 1.38 in 35.1 mm
    size - height 1.00 in 25.4 mm
    Dimensions (without cable) 4.0 oz 113,3 grams
    mounting thread 1/4 "-28 UNF no equivalent [3]
    Assembly torque 2 … 5 ft-lb 2.7 … 6.8 Nm
    sensor element ceramic
    geometry of the Sensor element shear principle
    housing material stainless steel
    sealing hermetically sealed welded
    Electrical connection integrated armoured cable
    cable exit side
    Terminal assigNment (red wire) X-axis
    Pin assigNment (white wire) Z axis
    (black wire) pin assigNment mass
    Pin assigNment (green wire) not used
    cable length 10 ft 3.0 m
    cable type polyurethane [2]
    notes
    [1] typically
    [2] 4-conductor shielded cable with twisted wire
    [3] mounting with M6 screw possible
    [4] zero-based balancing line, determined using the method of least squares
    [5] conversion factor 1 g = 9.81 m/s²
    [6] details: see PCBs Declaration of conformance PS023
    included Accessories
    081A68 mounting screw 1/4 "-28 x 0.9" -1
    ACS-2 T single point calibration at 100 Hz (traceable to NIST) for each axis in -1
    (M) metric mounting
    equipment
    M081A68 metric mounting bolt with M6 thread -1
    PCB-(M)605B61

    Specific References

    Download

    605B61_drawing.PDF

    Technical drawing

    Download (47.77k)

    605B61_manual.PDF

    Operating instructions

    Download (866.73k)

    605B61_specs.PDF

    Technical data sheet

    Download (58.53k)