PCB-(M)605B11
| basic data | |||
| sensitivity (±20%) | 100 mV/g | 10.2 mV/(m/s²) | [5] |
| measuring range | ±50 g | ±490 m / s² | |
| Frequency range (± 3 dB) | 30 … 300,000 cpm | 0.5 … 5,000 Hz | |
| resonance frequency | 600 kcpm | 10,000 Hz | [1] |
| Wide band resolution | 350 µg | 3.434 µm / s ² | [1] |
| linearity | ≤1% | [2] | |
| Transverse acceleration sensitivity | ≤ 5% | ||
| Conditions of use | |||
| Overload limit (shock) | 5,000 g pk | 49,050 m/s² pk | |
| Temperature range | -65 … 250 ° F | -54 … 121 ° C | |
| protection class | IP68 | ||
| Technical characteristics | |||
| settling time (on bias voltage ± 1%) | ≤ 2.0 s | ||
| discharging charging time constant | ≥ 0.3 s | ||
| Power | 18 … 28 V DC | ||
| constant power supply | 2 … 20 mA | ||
| Output impedance | < 150 Ω | ||
| Bias voltage | 8 … 12 V DC | ||
| Spectral noise (10 Hz) | 8 µg / √ Hz | 78.5 (µm / s ²) / √ Hz | [1] |
| spectral noise (100 Hz) | 5 µg / √ Hz | 49.1 (µm / s ²) / √ Hz | [1] |
| spectral noise (1,000 Hz) | 4 µg / √ Hz | 39.2 (µm / s ²) / √ Hz | [1] |
| electric Insulation (housing) | ≥ 100 MΩ | ||
| physical properties | |||
| size - diameter | 1.38 in | 35.1 mm | |
| Gr öße - height | 1.00 in | 25.4 mm | |
| dimensions (without cable) | 4.0 oz | 113,3 grams | |
| mounting thread | 1/4 "-28 UNF | " No equivalent | [4] |
| Assembly torque | 2 … 5 ft-lb | 2.7 … 6.8 Nm | |
| sensor element | ceramic | ||
| geometry the sensor element | shear principle | ||
| housing material | stainless steel | ||
| sealing | hermetically sealed welded | ||
| Electrical connection | potted integrated cable | ||
| cable exit | side | ||
| Terminal assigNment (red wire) | X-axis | ||
| Pin assigNment (white wire) | Z axis | ||
| (black wire) pin assigNment | mass | ||
| Pin assigNment (green wire) | not used | ||
| cable length | 10 ft | 3.0 m | |
| cable type | polyurethane | [3] | |
| notes | |||
| [1] | typically | ||
| [2] | zero-based balancing line, determined with the method of the smallestSquares | ||
| [3] | 4-conductor shielded cable with twisted wire | ||
| [4] | mounting with M6 screw possible | ||
| [5] | conversion factor 1 g = 9.81 m/s² | ||
| [6] | details: see PCBs Declaration of conformance PS023 | ||
| Accessories | |||
| 081A68 | mounting screw 1/4 "-28 x 0.9" | -1 | |
| ACS-2 T | single point calibration at 100 Hz (traceable to NIST) for each axis | -1 | |
| (M) metric mounting | |||
| equipment | |||
| M081A68 | metric mounting bolt with M6 threads | -1 |
PCB-(M)605B11
