TMS-2110E
- Dual purpose Shaker
- For the modal analysis as well as for part / component test
- Maximum force 489 N
- Frequency range 0... 6,500 Hz
- Stroke 25 mm
| specifications | |||
|---|---|---|---|
| Basic data | English units | SI units | |
| pk max force, sine (bei manueller Kühlung) | 110 lbf | 489 N | [1] [5] |
| maximum force, random vibration RMS (bei manueller Kühlung) | 45 lbf | 334 N | [1] [5] |
| pk max force, shock (50 ms) | 110 lbf | 489 N | |
| hub pk-pk, constant stimulation | 1.0 in | 25.4 mm | |
| Stroke, clipping area | 1.03 in | 26.2 mm | |
| nominal frequency range | 0... 6,500 Hz | [2] | |
| Basic resonance | > 4,000 Hz | [2] | |
| maximum vibration velocity | 70 in / s pk | 1.8 m/s pk | |
| Maximum acceleration amplitude (keine Last) | 110 g pk | 1,086 m/s² pk | |
| maximum acceleration amplitude (0,45 kg Last) | 55 g pk | 540 m/s² < sMall > pk | |
| maximum acceleration amplitude (2,3 kg Last) | 18 g pk | 177 m/s² pk | |
| maximum acceleration amplitude ( Resonance) | 150 g pk | 1.472 m/s² pk | |
| maximum acceleration amplitude (Schock Spitze) | 1.962 m/s² pk | ||
| Typical maximum payload | 10 lb | 4.5 kg | |
| physical properties | |||
| thread in the anchor plate | 5 x 10-32 | [3] | |
| Ankermasse | 0,454 kg | 1 lb | |
| Stiffness of the suspension | 90 lbf / in | 15.8 N/mm | |
| Nominal drive current (bei manueller Kühlung) | 22 A RMS | ||
| Magnetic stray field, 38 mm above the head plate | < 20 Gauss | >0.002 Tesla | |
| Magnetic stray field, 25 mm next to the housing | < 25 Gauss | >0.0025 Tesla | |
| Manual cooling | air: 100 cfm water: 15 cfm | air: 170 m³/h water: 25.5 m ³/h | [5] |
| Nominal dimensions (Höhe x Breite x Tiefe) | 11.7 x 12.5 x 6.5 in | 297 x 318 x 165 mm | [4] |
| nominal weight | 56 lb | 25 kg | |
| temperature | 40... 100 ° F, < 85% RH | 4... 38 ° C, < 85% RH | |
| power | 12 V DC, 12 A DC | [5] | |
| Notes | |||
|---|---|---|---|
| [1] | for the use of the maximum force of the Shaker with a TMS-2050E09 power amplifier must be fed and manually cooled. | ||
| [2] | Lastabhängig; the specified values apply when no load. | ||
| [3] | Chuck adapter for attachment of Stingers in the scope of delivery included | ||
| [4] | exact dimensions: see technical drawing in the data sheet | ||
| [5] | required for operation: power amplifier TMS-2050E09-FS and cooling Kit TMS-2000 X 04 | ||
| included supply | ||
|---|---|---|
| base | Mounting base EasyTurn ™-suspension, allows aligNment of the shaker in the direction of the excitation point | (1) |
| Electric wire | Shaker cable, length 2.4 m | (1) |
| 2000X03 | Accessory Kit (includes suitcases, Stinger, chuck adapter, allen wrench, spare fuse and other accessories) | (1) |
TMS-2110E
