TMS-2100E11
- Modal Shaker
- Force 440 N,.
- Frequency range 0... 5,400 Hz,
- Stroke 25.4 mm
specifications | |||
---|---|---|---|
basic data | English units | SI units | |
Max. Force application, sinus pk (at ambient air cooling) | 50 lbf | 220 N | |
Max. Power introduction, pk sine (for manual cooling) | 100 lbf | 440 N | [1] |
Hub pk-pk | 1.0 in | 25.4 mm | [2] |
Nominal frequency range | 0 ... 5400 Hz | [3] [4] | |
Nominal fundamental resonance | > 3600 Hz | [4] | |
Max. Acceleration amplitude (no load) | 102 g pk | 1000 m / s² pk | |
Max. Swing speed | 62.4 in / s pk | 1.6 m / s pk | |
protections | Overshoot limit switch overcurrent protection through in-line fuses | ||
physical properties | |||
Rated current consumption | 10 A RMS | ||
Nominal anchor resistance | 3.8 ? | [5] | |
anchor suspension | 8 bending beam made of carbon fiber composite | ||
Effective armature mass | 1 lb | 0.44 kg | |
Nominal dimensions (height x width x depth) | 12 x 12 x 8 in | 305 x 305 x 203 mm | [5] |
mass | 33 lb | 15 kg | |
Operating temperature | 41 ... 95 ° F, <85% RH | 5 ... 35 ° C, <85% RH |
Hints | |||
---|---|---|---|
[1] | For the use of maximum force application of the shaker must be cooled and fed manually using a power amplifier TMS-2100E18. | ||
[2] | Overshoot limit switch at 26 mm | ||
[3] | Specifying the frequency range based on the recommended in ISO 5344 Value: fundamental resonance × 1.5 | ||
[4] | load-dependent | ||
[5] | At room temperature (20 ° C) | ||
[6] | Exact dimensions: see technical drawing in the data sheet |
included supply | ||
---|---|---|
base | Mounting base EasyTurn ™-suspension, allows aligNment of the shaker in the direction of the excitation point | (1) |
Electric wire | Shaker cable, length 6 m | (1) |
mounting accessories | 10-32-mount adapter and chuck for mounting the Stingers | (1) |
2150G12 | Stingerkit, Stingerdurchmesser 1.6 mm | (1) |
2155G12 | Stingerkit, Stingerdurchmesser 2.4 mm | (1) |
K2160G | Steel Wire Stingerkit | (1) |