PCB-(M)354C10/NC

PCB-(M)354C10/NC

  • Triaxial ICP® miniature vibration sensor,
  • With through hole,
  • Masseisoliert,
  • Measuring range 500 g
  • Sensitivity 10 mV / g,
  • Frequency range 2 … 8,000 Hz,
  • Mass 5 grams,
  • Integrated connection cable, length 1.5 m,
    ending on 4-pin female connector,
  • without extension cable
  •  

    basic data
    sensitivity (±15%)10 mV / g1.02 mV/(m/s²) 
     
    range±500 g pk ±4. 905 m/s 2 pk 
     
    frequency range (±5%)2 … 8,000 Hz  
     
    Resonance frequency≥40,000 Hz  
     
    Wide band resolution0.003 g RMS0.03 m/s² RMS[2]
     
    Linearity error≤1% [3]
     
    transverse acceleration sensitivity≤5%  
    conditions
    (shock) overload limit± 10.000 g PK±98.100 m/s² pk 
     
    Temperature range-65 … 250 ° F-54 … 121 ° C[1]
    specifications
    power supply18 … 30 V DC  
     
    Constant power supply2 … 20 mA  
     
    output impedance≤200Ω  
     
    Bias voltage7 … 11 V DC  
     
    Discharging charging time constant0.3 … 1,0 s  
     
    settlingbr(auf Bias-Spannung ±10 %)< 3 s  
     
    Spectral noise (1 Hz)1,000 µg / √Hz9.810 (µm / s ²) / √Hz[2]
     
    spectral noise (10 Hz)300 µg / √Hz2.943 ( µm / s ²) / √ Hz[2]
     
    spectral noise (100 Hz)80 µg / √Hz785 (µm / s ²) / √Hz[2]
     
    spectral noise ( 1,000 Hz)25 µg / √Hz308 (µm / s ²) / √Hz[2]
     
    electrical insulation  
    physical properties
    Sensor elementceramic  
     
    geometry of the sensor elementshear principle  
     
    Housing materialtitanium  
     
    sealinghermetically sealed  
     
    size - H öhe0.30 in7.6 mm 
     
    size - length0.55 in14.0 mm 
     
    size - width0.55 in14.0 mm 
     
    Dimensions (without cable)0.18 oz5.0 grams[2]
     
    wiring1/4 "-28 4-pin  
     
    Cable outletOn the side  
     
    Cable length5 ft1.5 m 
     
    cord typetype 034, 4-wire shielded cable  
     
    Fixinghole  
    notes
    [1]the data for temperatures above 121 ° C applies only for transducers with HT option.  
     
    [2]typically  
     
    [3]zero-based balancing line, determined using the method of least squares  
     
    [4]Details: see PCBs Declaration of conformance PS023  
    Equipment
    039A21Allen wrench 3/32 "hex-1 
     
    081 B 93insulated mounting screw, 5-40 Thread x 12.7 mm long (for model 354C 10)-1 
     
    ACS-1 Tfrequency response for Triaxial accelerometer, traceable to NIST, 10 Hz up to the top 5% frequency-1 
    (M) metric mounting
    equipment   
     
    M039A22Allen wrench for use with M3-thread-1 
     
    M081B93metric mounting screw-1 
    (HT) high temperature electronics
    temperature range-65 … 325 ° F-54 … 163 ° C 

    30 other articles of the same category: