PCB-(M)353B15
- ICP®-miniature vibration sensor,
- Measuring range 500 g
- Sensitivity 10 mV / g,.
- Frequency range 1... 10,000 Hz,
- Dimensions 2 grams.
- 5-44 connector on the side
| basic data | |||
| Sensitivity (± 10%) | 10 mV / g | 1.02 mV / (m / s) | |
| measuring range | ± 500 g pk | ± 4,905 m / s² pk | |
| Frequency range (± 5%) | 1 ... 10,000 Hz | ||
| Frequency range (± 10%) | 0.7 ... 18,000 Hz | ||
| Frequency range (± 3 dB) | 0.35 ... 30,000 Hz | ||
| resonant frequency | ≥70.000 Hz | ||
| Broadband resolution | 0.005 g RMS | 0.05 m / s RMS | [1] |
| linearity error | ≤1% | [2] | |
| Lateral acceleration sensitivity | ≤5% | [3] | |
| Operating conditions | |||
| Overload limit (shock) | ± 10,000 g pk | ± 98,100 m / s² pk | |
| The temperature range (operation) | -65 ... 250 ° F | -54 ... 121 ° C | |
| Strain sensitivity (base surface) | ≤0,002 g / µε | ≤0,02 (m / s²) / µε | [1] |
| Technical characteristics | |||
| supply voltage | 20 ... 30 V DC | ||
| Constant current supply | 2 ... 20 mA | ||
| output impedance | ≤100 Ω | ||
| Bias voltage | 8 ... 12 V DC | ||
| discharging | 0.5 ... 2.0 s | ||
| settling | <5 s | ||
| Spectral Noise (1 Hz) | 2800 µg/√Hz | 27,468 (µm/s²)/√Hz | [1] |
| Spectral noise (10 Hz) | 700 µg/√Hz | 6,867 (µm/s²)/√Hz | [1] |
| Spectral noise (100 Hz) | 180 µg/√Hz | 1,766 (µm/s²)/√Hz | [1] |
| Spectral noise (1,000 Hz) | 64 ug / √Hz | 628 (µm/s²)/√Hz | [1] |
| physical properties | |||
| Size - Height | 0.43 in | 10.9 mm | |
| Size - Hexagon | 0.31 in | 7.9 mm | |
| Dimensions | 0.07 oz | 2.0 grams | [1] |
| sensor element | quartz | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| seal | Hermetically sealed | ||
| electrical connection | 5-44 Coaxial | ||
| port location | Laterally | ||
| mounting thread | 5-40 male | ||
| mounting torque | 8 ... 12 in-lb | 90 ... 135 Ncm | |
| Hints | |||
| [1] | typically, | ||
| [2] | Zero-based line of best fit, determined by the method of least squares | ||
| [3] | Lateral acceleration sensitivity typically ≤ 3% | ||
| [4] | Details: see PCB Declaration of Conformance PS023 | ||
| included supply | |||
| 080A109 | mounting wax | -1 | |
| 080A15 | adhesive mounting | -1 | |
| ACS-1 | Frequency response, traceable to NIST (10 Hz up to the top 5% point) | -1 | |
| (M) Metric assembly | |||
| mounting thread | M3 x 0.50 male | ||
| included supply | |||
| M080A15 | adhesive mounting | -1 | |
| (A) adhesive mounting | |||
| included supply | |||
| 080A90 | superglue | -1 | |
| (B) Reduced bias voltage | |||
| Bias voltage | 4.5 ... 7.5 V DC | ||
| supply voltage | 12 ... 30 V DC | ||
| Constant current supply | 1 ... 20 mA | ||
| measuring range | 300 g pk | 2,943 m / s pk | |
| (J) ground isolation | |||
| Frequency range (± 5%) | 1 ... 8000 Hz | ||
| Frequency range (± 10%) | 0.7 ... 15,000 Hz | ||
| resonant frequency | 56,000 Hz | ||
| electrical insulation | ?100 milliohms | ||
| Size - Hexagon | 0.37 in | 9.5 mm | |
| Size - Height | 0.57 in | 14.5 mm | |
| Dimensions | 0.11 oz | 3.2 grams | |
| (Q) Increased discharge time | |||
| Frequency range (± 5%) | 0.15 ... 10,000 Hz | ||
| Frequency range (± 10%) | 0.1 ... 18,000 Hz | ||
| discharging | ?5 s | ||
| settling | ?45 s | ||
| included supply | |||
| ACS-4 | Low frequency calibration (phase and amplitude) of 0.5 ... 10 Hz | -1 | |
| (W) Waterproof cable connection | |||
| port location | Laterally |
PCB-(M)353B15
