PCB-(M)352C65
    zoom_out_map

      PCB-(M)352C65

      • ICP®-miniature vibration sensor,
      • Measurement range 50 g,
      • Sensitivity 100 mV/g,
      • Frequency range 0.5... 10,000 Hz,
      • Dimensions 2 grams.
      • 5-44 connector on the side

       

      Basic data
      Sensitivity (±10 %)10.2 mV/(m/s²) 
       
      Measuring range±50 gPK±491 m/s²PK 
       
      Frequency range (≤5 %)0.5... 10,000 Hz  
       
      Frequency range (±10 %)0.3... 12,000 Hz  
       
      Frequency range (± 3 dB)0.2... 20,000 Hz  
       
      Resonance frequency≥35.000 Hz  
       
      Phase response (at 21 ° C) (±5 °)2... 6,000 Hz  
       
      Wide band resolution0,00016 g RMS0,0015 m/s² RMS[1]
       
      Linearity error±1 % [3]
       
      Transverse acceleration sensitivity≤5 % [4]
      Conditions of use
      Overload limit (shock)±5.000 gpk±49. 050 m/s² pk 
       
      temperature range (operation)-65 … 200 °F-54... 93 ° C[2]
       
      strain sensitivity (base area)>0.005 g/µε:< 0,05 (m/s²)/µε[1]
      technical characteristics
      supply voltage18... 30 V DC  
       
      constant power supply2... 20 mA  
       
      output impedance≤300Ω  
       
      Bias voltage8... 12 V DC  
       
      discharging charging time constant0.8... 2.4 s  
       
      spectral noise (10 Hz)16 µg/√Hz157 (µm/s²)/√Hz[1]
       
      spectral noise (100 Hz)5 µg/√Hz49 (µm/s²)/√Hz[1]
       
      spectral noise (1,000 Hz)1.5 µg/√Hz14.7 (µm/s²)/√Hz[1]
      Physical properties
      Mass0.070 oz2.0 grams[1]
       
      Sensor elementCeramic  
       
      Geometry of the sensor elementShear principle  
       
      Housing materialTitanium  
       
      SealingHermetically sealed welded  
       
      Electrical connection5-44 coaxial  
       
      Connecting positionOn the side  
       
      Mounting thread5-40 male  
       
      Installation torque8... 12 in-lb90... 135 NCM 
      Notes
      [1]Typically  
       
      [2]The data for temperatures above 93 ° C applies only for transducers with HT option.  
       
      [3]Zero-balance just, determined using the method of least squares  
       
      [4]Transverse acceleration sensitivity typically ≤3%  
       
      [5]Details: see PCBs Declaration of conformance PS023  
      Included accessories
      080A109Mount wax-1 
       
      080A15Adhesive mounting-1 
       
      ACS-1Frequency response, traceable to NIST (10 Hz up to the upper 5%-Punkt)-1 
      (A) bonding
      Included accessories   
       
      080A90Superglue-1 
      (M) metric mounting
      Mounting threadM3 x 0.50 male  
       
      Included accessories   
       
      M080A15Adhesive mounting-1 
      (HT) High temperature electronics
      Frequency range (5%)5 Hz  
       
      Frequency range (10%)3 Hz  
       
      Frequency range (3 dB)2 Hz  
       
      Wide band resolution0.0002 g RMS0,002 m/s² RMS 
       
      Temperature range-65... 250 ° F-54... 121 ° C 
       
      Discharge charge time constant0.08... 0.24 s  
       
      Spectral noise (1 Hz)75 µg/√Hz736 (µm/s²)/√Hz 
       
      Spectral noise (10 Hz)25 µg/√Hz245 (µm/s²)/√Hz 
       
      Spectral noise (100 Hz)5 µg/√Hz49 (µm/s²)/√Hz 
       
      Spectral noise (1,000 Hz)1.5 µg/√Hz14.7 (µm/s²)/√Hz 
      (J) mass insulation
      Frequency range (5%)8,000 Hz  
       
      Frequency range (10%)10,000 Hz  
       
      Frequency range (3 dB)16,000 Hz 
       
      resonance frequency  
       
      electrical insulation  
       
      size - hex0.37 in9.5 mm 
       
      size - height0.55 in14.0 mm 
       
      mass0.1 oz2.8 grams 
      (W) waterproof Cable
      connection positionside  
      PCB-(M)352C65

      Specific References

      Download

      352C65_drawing.PDF

      Technical drawing

      Download (117.03k)

      352C65_manual.PDF

      Operating instructions

      Download (1.81M)

      352C65_specs.PDF

      Technical data sheet

      Download (71.65k)