PCB-054236-01804

PCB-054236-01804

  • DMS miniature measuring washer
    for the measurement of static forces,
  • Screw diameter 36 mm,.
  • Range 680 kN,
  • Nominal 1.5 mV / V,.
  • Integrated cable, length 1.5 m,
    ending on open ends

basic data
measuring range152,870 lb680 kN[2]
characteristic value1.50 mV / V[1] [2]
linearity error± 5% FS[1]
hysteresis± 5% FS[1]
repeatability± 2% FS[1]
resonant frequency10,000 Hz
Operating conditions
Overload limit229,305 lb1,020 kN
The temperature range (operation)0 ... 200 ° F-18 ... 93 ° C
Temperature range (compensated)No information
Influence of temperature on the output signal (maximum)± 0.02%. Reading / ° F± 0.036% v. Reading / ° C[3]
Temperature influence on the deviation from zero (maximum)≤0.02% FS / ° F± 0.036% FS / ° C[1]
Technical characteristics
bridge resistance350 ?[2]
Supply voltage (recommended)10 V DC[4]
output polaritypositive
physical properties
Size - Diameter3.13 in78.9 mm
Size - Height0.875 in22.2 mm
Screw diameter1.417 in36 mm
Diameter of the through hole1.426 in36.19 mm
sensor elementStrain gauges
electrical connectiontinned
cable outletLaterally
Hints
[1]FS = "Full Scale": full scale
[2]Nominal
[3]Over the compensated temperature range
[4]Calibrated with 10 V DC supply voltage; Supply with 5 ... 20 V DC or VAC RMS possible
additional information
descriptionmounting sleeve
characteristicsThread: 5/16 "-24-2A
  • For series PCB-111, PCB-112, PCB-113
descriptionmounting sleeve
characteristicsThread: M7 x 0.75
  • For series PCB-111, PCB-112, PCB-113
descriptionmounting sleeve
characteristicsThread: 3/4 "-16
  • For models PCB 106B50, PCB 106B51, PCB 106B52
descriptionmounting sleeve
characteristicsThread: 9/16 "-18-2A
  • For models PCB 106B, 116B PCB, PCB-106M131
descriptionmounting sleeve
characteristicsThread: M20 x 1,5-6g
  • For models PCB 106B50, PCB 106B51, PCB 106B52
descriptionmounting sleeve
characteristicsThread: M14 x 1.25
  • For models PCB 106B, 116B PCB, PCB-106M131
descriptionThreaded Adapter
characteristicsThread: 3/8 "-24 to 5/16" -24
  • For series PCB-111, PCB-112, PCB-113
descriptionThreaded Adapter
characteristicsThread: M10 x 1 to 5/16 "-24
  • For series PCB-111, PCB-112, PCB-113
descriptionThreaded Adapter
characteristicsThread: 1/8 "-27 NPT to 5/16" -24
  • For series PCB-111, PCB-112, PCB-113
TypeOscilloscope adapter
connector 110-32 socket
connector 2BNC connector
Typeadapter
connector 110-32 plug
connector 2BNC connector
Typecable coupling
connector 110-32 socket
connector 210-32 socket
Typecable coupling
connector 110-32 socket
connector 2BNC connector
TypeT-connector
connector 1BNC connector
connector 22x BNC socket
Typecable coupling
connector 1BNC connector
connector 2BNC connector
Typesealed passage
connector 1BNC connector
connector 210-32 socket
Typesealed passage
connector 110-32 socket
connector 210-32 socket
Typeangle connector
connector 110-32 plug
connector 210-32 socket
Typesolder adapter
connector 110-32 plug
connector 2solder tabs
descriptionTwo-component adhesive
characteristicsSmall containers
  • epoxy resin

10 other articles of the same category: