PCB-054216-01144
zoom_out_map

PCB-054216-01144

  • DMS miniature measuring washer
    for the measurement of static forces,
  • Screw diameter 16 mm,.
  • Measuring range 140 kN
  • Nominal 1.5 mV / V,.
  • Integrated cable, length 1.5 m,
    ending on open ends

 

basic data
measurement range 31.473 lb 140 kN [2]
 
factor 1,50 mV / V   [1] [2]
 
Linearitä avoidable ±5% FS   [1]
 
hysteresis ±5% FS   [1]
 
repeatability ±2% FS   [1]
 
Resonance frequency 10,000 Hz    
conditions of use
Overload limit 47.210 lb ≥10 kΩ  
 
Temperature range (operation) 0 …200 °F 18 … 93 ° C  
 
Temperature range (offset) not specified    
 
influence of temperature on the output signal (maximum) ±0, 02% of measured value / ° F ±0. 036% of reading / ° C [3]
 
temperature influence on (max) zero signal deviation/±0, 02% FS / ° F/±0, 036% FS / ° C [1]
technical Properties
Bridge resistance 350Ω   [2]
 
supply voltage (recommended) 10 V DC   [4]
 
output polarity positive    
physical properties
size - diameter 1,348 in 34.2 mm  
 
Size - height 0.525* in 13.3 mm  
 
screw diameter 0,630 in 16 mm  
 
Diameter of the bore hole 0,636 in 16.16 mm  
 
sensor element strain    
 
wiring Tinned ends    
 
cable exit side    
notes
[1] FS = "Full Scale": full scale    
 
[2] nominal    
 
[3] over the compensated temperature range    
 
[4] calibrated 10 v DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible    
PCB-054216-01144

Specific References

Download

0542xx-01xxx_drawing.pdf

Technical drawing

Download (466.12k)

054216-01144_manual.pdf

Operating instructions

Download (422.66k)

054216-01144_specs.pdf

Technical data sheet

Download (13.43k)