PCB-(M)206C

PCB-(M)206C

  • ICP® power measurement washer,
  • Measuring range 356 kN,
  • Sensitivity 13,5 mV / kN,
  • Frequency range 0.0003 … 40,000 Hz,
  • 10-32 female connector on the side
  •  

    basic data
    sensitivity (±15%)0.06 mV / lb13,5 mV / kN 
     
    measuring range (pressure)80,000 lb355,86 kN 
     
    Maximum permissible static load (force)90,000 lb400,34 kN 
     
    wide band resolution1.8 lb RMS8.0 N RMS[1]
     
    Lower limiting frequency (-5%)0.0003 Hz [2]
     
    upper frequency limit40,000 Hz [4]
     
    linearity error≤ 1% FS [3]
    conditions
    temperature range-65 … 250 ° F-54 … 121 ° C 
     
    temperature coefficient Temperature coefficient of sensitivity≤0,01 %/°F≤0,198 %/°C 
    technical properties
    discharge charge time constant (at room temperature) ≥ 2,000 s  
     
    Supply20 … 30 V DC  
     
    Konstantstromversorgung2 … 20 mA  
     
    output impedance≤100 Ω  
     
    Bias voltage8 … 14 V DC  
     
    Spectral noise (1 Hz)0.16 lb / √Hz0.71 N / √Hz[1]
     
    spectral noise (10 Hz)0.050 lb / √Hz0.22 N / √Hz[1]
     
    spectral noise (100 Hz)0.014 lb / √Hz0.0625 N / √Hz[1]
     
    spectral noise (1,000 Hz)0,0036 lb / √Hz0,0160 N / √Hz[1]
     
    (pressure) output polaritypositive  
    physical properties
    preload16,000 lbkN 71,172 
     
    stiffness74 lb/µin13 kN/µm[1]
     
    size - diameter2.05 in52.1 mm 
     
    Size - height0,590 in15 mm 
     
    size - inner diameter (hole diameter)1,025 in26 mm 
     
    Size - diameter of the measuring surface1,750 in44.4 mm 
     
    dimensions5.5 oz155 grams 
     
    housing materialStainless steel  
     
    sealinghermetically sealed  
     
    electrical connection10-32-coaxial socket  
     
    Connection positionside  
    notes
    [1]typically  
     
    [2]based on the Calculated discharge charge time constant  
     
    [3]zero-based balancing line, determined using the method of least squares  
     
    [4]Accepted value determined on the basis of solid state Dynamics calculations  
     
    [5]details: see PCBs Declaration of conformance PS023  
    included Accessories
    080A82grease-1 
     
    081A16mounting bolts, 7/8-14 x 1,900 ", BeCu-1 
     
    082 B 06Washer-1 
     
    083 B 06mounting sleeve (for the models 206 C and 216 B)-1 
    (M) metric mounting
    equipment   
     
    M081A16mounting bolts, M22 x 2.00 x 1,900 ", BeCu-1 
     
    M083B06mounting sleeve-1 
    (S) negative output polarity
        
    (W) waterproof cable connection
    Electrical connectionsealed cable connection  
     
    cable exitside  

    29 other articles of the same category: