PCB-357A07
| basic data | |||
| sensitivity (±20%) | 1.7 pC/g | 0.17 pC/(m/s²) | |
| range | ±2. 000 g PK | ±19. 620 m/s² pk | |
| frequency range (+ 5%) | 15,000 Hz | [1] | |
| Frequency range (+ 10%) | 20,000 Hz | [1] | |
| resonance frequency | ≥60.000 Hz | ||
| linearity | ≤ 1% | [3] | |
| Transverse acceleration sensitivity | ≤ 5% | ||
| conditions | |||
| (shock) overload limit | ± 10.000 g PK | ±98.100 m/s² pk | |
| Temperature range | 100 … 500 ° F | 73 … 260 ° C | |
| strain sensitivity (base area) | ≤ 0.10 g/µε | ≤ 1.0 (m/s²)/µε | [2] |
| technical characteristics | |||
| capacity | 340 pF | [2] | |
| insulation resistance (at 21 ° C) | > 10,000 M Ω | ||
| output polarity | negative | ||
| Physical properties | |||
| Sensor element | ceramic | ||
| Geometry of the sensor element | shear principle | ||
| housing material | titanium | ||
| sealing | Hermetically sealed | ||
| size - height | 0,195 in | 4.9 mm | |
| size - length | 0,420 in | 10.7 mm | |
| Size - width | 0.250 in | 6.4 mm | |
| mass | 0.03 oz | 0.96 grams | [2] |
| electric Connection | M3 coaxial connector | ||
| connection position | side | ||
| attachment | bonding | ||
| Notes | |||
| [1] | the lower cut-off frequency depends on the used signal conditioning electronics. | ||
| [2] | Typically | ||
| [3] | zero-based balancing line, determined using the method of least squares | ||
| Accessories | |||
| 030 B 10 | Low-noise-Teflon cable, length 3 m, M3 plug to 10-32 | -1 | |
| 039A28 | transfer tool | -1 | |
| 080A109 | Mount wax | -1 | |
| ACS-1 | frequency response, traceable to NIST (10 Hz up to the upper 5% point) | -1 | |
| (P) positive output voltage | |||
PCB-357A07
