PCB-M1403-02B
    zoom_out_map

      PCB-M1403-02B

    • Load cell for static measurements,
    • Measuring range 2,500 N,
    • Nominal 1 mV / V,
    • Anschlusskonnektor PC04E-10-6 p side illustration

      shows load cell load base PCB M084A100 < br(separat erhältlich)
    •  

      basic data
      measuring range562 lb2,500 N[1]
       
      value (±10%)1.0 mV / V [2]
       
      linearity error≤0.05% FS  
       
      hysteresis≤0.05% FS  
       
      repeatability≤0.02% FS  
       
      Resonance frequency3,500 Hz  
       
      creep error0.03%  
      conditions
      Overload limit1,000 lb4.448 N 
       
      maximum load (lateral force, F X, or F Y)500 lb2.220 N[4]
       
      maximum load (bending moment M X or M Y)500 in-lb56 Nm[4]
       
      maximum load (axial torque, M Z)500 in-lb56 Nm[4]
       
      temperature range (operation)-65 …200 °F-54 … 93 ° C 
       
      Temperature range (offset)70 … 170 ° F21 … 77 ° C 
       
      influence of temperature on the output (max)±0. 002% v. reading / ° F±0, 0036% of reading / ° C[3]
       
      temperature influence on (max) zero signaldeviation/±0, 001% FS / ° F±0, 0018% FS / ° C[3]
      Technical
      Bridge resistance700 ? [2]
       
      supply voltage (recommended)10 V DC [5]
       
      insulation resistance> 5,000 M ?  
       
      zero signal deviation≤1.0% FS  
      -physical Properties
      size - diameter4.12 in104.6 mm 
       
      size - height1.37 in34.8 mm 
       
      Weight2.88 lb1.31 kg 
       
      Assembly threadedM16 x 2-4 h female  
       
      housing materialStainless steel  
       
      sensor elementstrain  
       
      Assembly torque23 Nm 
       
      Stretch at full load0.001 in0.025 mm 
       
      wiringPC04E-10-6 p  
       
      connection positionside  
      Notes
      [1]FS = "Full Scale": full scale  
       
      [2]nominal  
       
      [3]over the compensated temperature range  
       
      [4]insulated load the load cell with the named power or with the designated moment < br(keine zusä) additional loads)  
       
      [5]calibrated with 10 V DC supply voltage; Power supply with 5 … 20 V DC or V AC RMS possible  
      PCB-M1403-02B

      Specific References

      Download

      M1403-02B_drawing.pdf

      Technical drawing

      Download (109.36k)

      M1403-02B_manual.pdf

      Operating instructions

      Download (1.09M)

      M1403-02B_specs.pdf

      Technical data sheet

      Download (20.55k)