PCB-3711F1250G
- MEMS accelerometer
- Suitable for measuring static accelerations
- Measuring range ± 50 g pk (± 490m / s²)
- Sensitivity (± 3%) 27 mV / g (2.8mV / (m / s²))
- Frequency range (± 5%) 0… 1,500 Hz
- Supply voltage 5… 32 V DC
- Integrated connection cable, length 3 meters,
ending on stripped and tinned ends
| Specifications | |||
|---|---|---|---|
| Basic data | English units | SI units | |
| Sensitivity (± 5%) | 27 mV/g | 2,8 mV/(m/s²) | [1] |
| Measuring range | ± 50 g pk | ±490 m/s²pk | |
| Frequency range (± 5%) | 0 … 1.500 Hz | ||
| Frequency range (± 10) | 0 … 2.000 Hz | ||
| Resonance frequency | >6.500 Hz | ||
| Phase response (100 Hz) | <10 ° | ||
| Broadband resolution | 1,5 mg rms | 0,015 m/s²RMS | [2] |
| Linearitätsfehler | ≤1 % | [3] | |
| Lateral acceleration sensitivity | ≤3 % | ||
| Conditions of use | |||
| Overload limit (shock) | ± 5,000 g pk | ±49.050 m/s²pk | |
| Temperature range (operation) | -65 … 250 °F | -54,0 … 121 °C | |
| Temperature range (storage) | -65 … 250 °F | -54,0 … 121 °C | |
| Temperature coefficient of the zero point | ±1,5 % FSO | [4] | |
| Temperature coefficient of sensitivity | ±2,5 % | [4] | |
| Stretch sensitivity (base area) | 0.001 g / ml | 0.01 (m / s²) / ε | [2] |
| Magnetic sensitivity | 40 µg/gauss | 3,9 (m/s²)Tesla | [2] |
| Technical characteristics | |||
| Supply voltage | 5 … 32 VDC | ||
| Power consumption | ≤5 mA | ||
| Output impedance | ≤120 Ω | ||
| Voltage offset | ±20 mVDC | [5] | |
| Spectral Noise (1) | 250 µg/√Hz | 2.453 (µm / s²) / √Hz | [2] |
| Electrical insulation (housing) | >100 MΩ | ||
| Physical characteristics | |||
| Housing material | Anodized aluminum | ||
| seal | Epoxy resin | ||
| Size - height | 0,30 in | 7,62 mm | |
| Size - length | 1,00 in | 25,4 mm | |
| Size - width | 0,85 in | 21,6 mm | |
| Mass (without cable) | 0,35 oz | 9.92 grams | [2] |
| Electrical connection | Integrated cable | ||
| Cable outlet | Laterally | ||
| Cable termination | Tinned ends | ||
| Cable type | Type 010, shielded 4-wire cable | ||
| Cable length | 10 ft | 3 m | |
| Attachment | Through Holes (2) | ||
| Hints | |||
|---|---|---|---|
| [1] | Measured at 100 Hz, 10 g RMS | ||
| [2] | Typically | ||
| [3] | Zero-based best-fit line, determined using the least squares method | ||
| [4] | -54… 121 ° C, reference 24 ° C | ||
| [5] | Offset with 3 meter cable length (type 010) | ||
| [6] | Details: siehe PCB Declaration of Conformance PS027 | ||
| included supply | ||
|---|---|---|
| M081A113 | Metric mounting screw | (2) |
| 081A113 | Mounting screw | (2) |
| ACS-172 | Calibration of the amplitude and phase response from 5 Hz to the upper ± 5% frequency range | (1) |
PCB-3711F1250G
