PCB-(M)640B60
zoom_out_map

PCB-(M)640B60

  • Vibration transmitter with power output according to
    the peak value of vibration speed,
  • measuring range 0 … 12.7 mm / s,
  • output range 4 … 20 mA,
  • frequency range 3 … 1,000 Hz,
  • integrated Armored cable, length 3 m,
    ending on cut end
  • "
    basic data
    range 0,0 … 0.5 in / s pk 0.0 … 12.7 mm / s pk [1]"
    Output area 4 … 20 mA
    frequency range (± 10%) 180 … 60,000 cpm 3 … 1,000 Hz [2] [3]
    Wide band resolution 0.005 in / s pk 0.13 mm / s pk [4]
    Linearity error ≤1%
    conditions of use
    temperature range -40 … 185 ° F -40 … 85 ° C
    technical Properties
    power 12 … 30 V DC
    settling time (area within ±2% of full scale) <15 s
    electrical insulation (housing) > 100,000,000 Ω
    physical properties
    size -. Allen 1.0 in 25,.4 mm
    size - height 4.2 in 107 mm
    dimensions (without cable) 4.7 oz 131 grams
    Mounting thread 1/4 "-28 UNF No metric equivalent
    Assembly torque 3 … 5 ft-lb 4 … 7 Nm
    sensor element" Ceramic
    geometry of the sensor element shear principle
    housing material stainless steel
    Sealing hermetically sealed welded
    electrical connection integrated armoured cable
    Cable outlet Top
    Connections (red wire) output signal 4 … 20 mA positive
    pin assigNment (blue wire) output signal 4 … 20 mA negative
    cable length 10 ft 3.0 m
    cable type polyurethane
    notes
    [1] Conversion factor 1 in / sec = 0.0254 m/sec.
    [2] at frequencies below 5 Hz, the output signal fluctuates.
    [3] 1 Hz 60 = cpm ("Cycles Per Minute": rpm).
    [4] typically
    [5] details: see PCB Declaration of Conformance PS039 and PS053
    equipment
    081A40 mounting bolts with 1/4 "-28 thread" -1
    ICS-4 frequency response cpm for uniaxial sensors from 0 (0 Hz) up to the upper 10% frequency of vibration transmitter -1
    (EX) with ATEX approval
    Approval for use in potentially explosive atmospheres EEx ia IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 1 G
    approval for use in potentially explosive atmospheres EEx nL IIC T4,-40 ° C ≤ Ta ≤ 80 ° C, II 3 G
    approval for use in potentially explosive atmospheres DIVI, CL I, II, III, GRPS A-G, ExIA, AExia, IIC T4
    approval for use in potentially explosive atmospheres DIV II, CL I, GRPS A-D, ExnL, AExnA, IIC T4
    (RV) Raw signal output≥ 100 MΩ/g (±20%)
    electrical connection integrated armoured cable
    connections (red wire) output signal 4 … 20 mA positive
    (Black wire) pin assigNment output signal 4 … 20mA negative
    pin assigNment (white wire) raw signal positive
    pin assigNment (green wire) raw signal negative
    (M) metric mounting
    equipment
    M081A61 metric mounting bolts with M6 thread -1
    PCB-(M)640B60

    Specific References

    Download

    640B60_drawing.PDF

    Technical drawing

    Download (41.73k)

    640B60_manual.PDF

    Operating instructions

    Download (734.55k)

    640B60_specs.PDF

    Technical data sheet

    Download (81.27k)