PCB-(M)608A12
    zoom_out_map

      PCB-(M)608A12

    • Industrial ICP® vibration sensor,
    • Measuring range 10 g,
    • Sensitivity500 mV / g,
    • Frequency range 0.5 … 3,000 Hz,
    • One-point calibration at 100 Hz,
    • Integrated cable, length 3 m,
      ending on cut end
    •  

      basic data
      sensitivity (±20%)500 mV / g51.0 mV/(m/s²)[5]
       
      measuring range± 10 g±98 m / s² 
       
      Frequency range (± 3 dB)30 … 180,000 cpm0.5 … 3,000 Hz[1]
       
      resonance frequency1,500 kcpm25,000 Hz[2]
       
      Wide band resolution300 µg2.943 µm / s ²[2]
       
      linearity≤1% [3]
       
      Transverse acceleration sensitivity≤ 7%  
      conditions of use
      Overload limit (shock)5,000 g pk49,050 m/s² pk 
       
      temperature range-65 …200 °F-54 … 93 ° C 
       
      Type of protectionIP68  
      Technical characteristics
      settling time (on bias voltage ± 1%)≤5.0 s  
       
      discharging charging time constant≥0.3 s  [4]
       
      Assembly torque2 … 5 ft-lb2.7 … 6.8 Nm 
       
      sensor elementceramic  
       
      Geometry of the sensor elementshear principle  
       
      housing materialstainless steel  
       
      sealingShed  
       
      cable outlettop  
       
      cable length10 ft3 m 
       
      cable typePolyurethane  
      Notes
      [1]the upper cut-off frequency tolerance: ±10%  
       
      [2]typically  
       
      [3]zero-based balancing line, determined using the method of least squares  
       
      [4]no equivalent in SI units  
       
      [5]conversion factor 1 g = 9.81 m/s²  
       
      [6]details: see PCBs Declaration of conformance PS023  
      Accessories
      081A40Mounting bolts with 1/4 "-28 thread-1 
       
      ICS-2single point calibration at 100 Hz (traceable to NIST)-1 
      (M) metric mounting
      equipment   
       
      M081A61metric mounting bolts with M6 thread-1 
      (TO) temperature output
      temperature range36 …200 °F2 … 93 ° C 
       
      transcription factor5.56 mV / ° F
      (zero point at 32 °F)
      10 mV / ° C 
       
      wiring3-pin MIL-C-5015  
       
      electrical connector (connector A)acceleration output  
       
      electrical connection (connection B)dimensions  
       
      Electrical connection (connection C)temperature output  
       
      size - height1.86 in47.2 mm 
       
      Mass2.0 oz56.7 grams 
      PCB-(M)608A12

      Specific References

      Download

      608A12_drawing.PDF

      Technical drawing

      Download (58.07k)

      608A12_specs.PDF

      Technical data sheet

      Download (27.33k)