PCB-422E55
basic data | |||
transcription factor (±2. 5%) | 0.5 mV/pC | ||
range | ±8 V | ||
Lower limiting frequency (-5%) | 0.5 Hz | ||
upper cut-off frequency (-5%) | 100,000 Hz | [2] | |
linearity error | ≤ 1.0% FS | ||
conditions of use | |||
temperature range (operation) | -65 … 250 ° F | -54 … 121 ° C | |
maximum Shock resistance | 5,000 g pk | 49,050 m/s² pk | |
maximum acceleration (5) | 100 g pk | 981 m/s² pk | |
technical | |||
power supply | 18 … 28 V DC | ||
constant power supply | 2 … 20 mA | ||
Output range | ±5, 0 V | ||
Output polarity | inverted | ||
output impedance | 100 Ω | ||
Bias voltage | 9 … 13 V DC | ||
Maximum sensor input voltage | 30 V | ||
wide band noise (1 … 10,000 Hz) | 33 µV | -90 dB | |
Spectral noise (1 Hz) | 9.8 µV / √ Hz | -100 dB | [1] |
spectral noise (10 Hz) | 3 µV / √ Hz | -110 dB | [1] |
Spectral noise (100 Hz) | 0.8 µV / √ Hz | -122 dB | [1] |
spectral noise (1,000 Hz) | 0.4 µV / √ Hz | -128 dB | [1] |
Spectral noise (10,000 Hz) | 0.2 MV / √ Hz | -134 dB | [1] |
capacity (feedback branch of the amplifier) | 2,000 pF | ||
Recovery time after clipping | 10 µs | ||
discharging charging time constant | > 1 s | ||
Resistance (feedback branch of the amplifier) | 15,000 M Ω | ||
influence of the input capacitance (sensor + cable) on transcription factor | -0.0005% /. pF | ||
physical properties | |||
housing material | stainless steel | ||
waterproofing | epoxy resin | ||
Electrical connection (input) | 10-32-coaxial socket | ||
electrical connection (output) | BNC Plug | ||
Gr öße - diameter | 0.52 in | 13 mm | |
size - length | 3.4 in | 86 mm | |
mass | 1.15 oz | 32.7 grams | |
Notes | |||
[1] | typically | ||
[2] | the upper cutoff frequency can by the level of constant current and the length of the Cable output used be reduced. | ||
[3] | details: see PCBs Declaration of conformance PS024. CE conformity is only by weight &AmericanCatholic.org; provides, if the housing is grounded. |