PCB-422E36
basic data | |||
transcription factor (±2%) | 10 mV / pC | ||
entrance | ±250 pC | ||
Lower limiting frequency (-5%) | 5 Hz | [3] | |
upper frequency limit (constant current 2.2 mA) | 50,000 Hz | [2] | |
upper frequency limit ( Constant current 4 mA) | 75,000 Hz | [2] | |
upper frequency limit (constant current 20 mA) | 100,000 Hz | [2] | |
linearity error | ≤ 1.0% FS | ||
conditions of use | |||
temperature range (operation) | -65 … 250 ° F | -54 … 121 ° C | |
influence of temperature on Transcription factor | < 2% | ||
maximum shock resistance | 1,000 g pk | 9,810 m/s² PK | |
Permissible air humidity | 1 | ||
specifications | |||
power supply | 18 … 28 V DC | ||
constant power supply | 2.2 … 20 mA | ||
settling | < 6 min | ||
Output range | ±2. 5 V | ||
output polarity | inverted | ||
output impedance | < 10 Ω | ||
Bias voltage | 12 … 15 V DC | ||
maximum voltage at the sensor input | 30 V | ||
Wide band noise (1 … 10,000 Hz) | 26.0 µV | -92 dB | [1] |
spectral noise (1 Hz) | 13.0 µV / √ Hz | -98 dB | [1] |
spectral noise (10 Hz) | 2.20 µV / √ Hz | -113 dB | [1] |
spectral noise (100 Hz) | 0.50 µV / √ Hz | -126 dB | [1] |
spectral noise (1,000 Hz) | 0.19 µV / √ Hz | -134 dB | [1] |
spectral noise (10,000 Hz) | 0.10 µV / √ Hz | -. 140 dB | [1] |
Maximum capacity on the sensor input | 2,000 pF | ||
minimal resistance at the sensor input | 10,000 Ω | ||
Influence of the input capacitance (sensor + cable) on transcription factor | < 0.00≤5 %/pF | ||
Physical properties | |||
housing material | stainless steel | ||
seal | welded | ||
Electrical connection (input) | 10-32-coaxial socket | ||
electrical connection (output) | BNC Plug | ||
Gr öße - diameter | 0.52 in | 13 mm | |
size - length | 3.4 in | 86 mm | |
weight | 1.1 oz | 31 grams | |
Notes | |||
[1] | tested with a voltage source and a capacitor (to simulate of a sensor) | ||
[2] | above the specified It comes to errors due to the low maximum rise and drop speed of the charge amplifier frequency. | ||
[3] | the lower cut-off frequency tolerance: ±10% | ||
[4] | details: see PCB Declaration of Conformance PS024. CE conformity is only guaranteed, if the housing is earthed. | ||
(T) TEDS memory in accordance with IEEE PP1451. 4 | |||
temperature range | -40 … 185 ° F | -40 … 85 ° C |