PCB-422E06
zoom_out_map

PCB-422E06

  • Inline charge amplifier,
  • Input range of ±10. 000 pC,
  • Output range ±2, 5 V,
  • Transcription factor: 0.25 mV / pC,
  • Frequency range 0.5 … 100,000 Hz (depends on the constant current)
  • Details
    basic data
    transcription factor (±2%) 0.25 mV / pC
    Overload range ±3 V
    Lower limiting frequency (-5%) 0.5 Hz
    upper frequency limit (constant current 2.2 mA) 10,000 Hz [2]
    upper frequency limit ( Constant current 4 mA) 40,000 Hz [2]
    upper frequency limit (constant current 20 mA) 100,000 Hz [2]
    linearity error ≤ 1.0% FS
    conditions of use
    temperature range (operation) -65 … 250 ° F -54 … 121 ° C
    influence of temperature on Transcription factor < 1%
    maximum shock resistance 1,000 g pk 9,810 m/s² PK
    Specifications
    power supply 18 … 28 V DC
    Constant power supply 2.2 … 20 mA
    output range ±2. 5 V pk
    output polarity inverted
    Output impedance < 20 Ω
    Bias voltage 12.75 … 14.25 V DC
    Maximum sensor input voltage 30 V
    wide band noise (1 … 10,000 Hz) 4.0 µV 108 dB [1]
    Spectral noise (1 Hz) 2.5 µV / √ Hz -112 dB [1]
    Spectral noise (10 Hz) 0.2 MV / √ Hz -134 dB [1]
    spectral noise (100 Hz) 0.1 µV / √ Hz -140 dB [1]
    Spectral noise (1,000 Hz) 0.04 µV / √ Hz -148 dB [1]
    spectral noise (10,000 Hz) 0.03 µV / √ Hz -150 dB [1]
    Discharging charging time constant 1.0 s
    minimal resistance at the sensor input 70 M Ω [3]
    influencethe input capacitance (sensor + cable) on transcription factor 0.00≤5 %/pF
    physical properties
    housing material stainless steel
    Seal welded
    electrical connection (input) 10-32-coaxial socket
    electric Connection (output) BNC male
    size - diameter 0.52 in 13 mm
    size - length 3.4 in 86 mm
    Mass 1.15 oz 32.7 grams
    notes
    [1] tested with a voltage source and a capacitor (to simulate of a sensor)
    [2] above the specified rate, it comes to errors due to the low maximum rise and drop speed of the charge amplifier.
    [3] do not use with low-impedance input resistances (especially not suitable for sensors, which are exposed to temperatures above?200 ? C)
    [4]: see PCBs Declaration of conformance PS024. CE conformity is only guaranteed, if the housing is earthed.
    (T) TEDS memory in accordance with IEEE PP1451. 4
    temperature range -40 … 185 ° F -40 … 85 ° C
    Bias voltage 13.35 … 14.85 V DC
    PCB-422E06

    Specific References

    Download

    422E06_drawing.PDF

    Technical drawing

    Download (106.46k)

    422E06_manual.PDF

    Operating instructions

    Download (375.26k)

    422E06_specs.PDF

    Technical data sheet

    Download (74.51k)