PCB-422E05
    zoom_out_map

      PCB-422E05

    • Inline charge amplifier,
    • Input range ±5. 000 pC,
    • Output range ±2, 5 V,
    • Transcription factor: 0.5 mV / pC,
    • Frequency range 0.5 … 100,000 Hz (depends on the constant current)
    • basic data
      transcription factor (±2%)0.50 mV / pC
      Overload range±3 V
      Lower limiting frequency (-5%)0.5 Hz
      upper frequency limit (constant current 2.2 mA)30,000 Hz[1]
      upper frequency limit ( Constant current 4 mA)≥60.000 Hz[1]
      upper frequency limit (constant current 20 mA)100,000 Hz[1]
      linearity error≤ 1.0% FS
      conditions of use
      temperature range (operation)-65 … 250 ° F-54 … 121 ° C
      influence of temperature on Transcription factor< 1%
      maximum shock resistance1,000 g pk9,810 m/s² PK
      Specifications
      power supply18 … 28 V DC
      Constant power supply2.2 … 20 mA
      output range±2. 5 V
      output polarityinverted
      Output impedance< 20 Ω
      Bias voltage12.75 … 14.25 V DC
      Maximum sensor input voltage30 V
      wide band noise (1 … 10,000 Hz)4.0 µV108 dB[1]
      Spectral noise (1 Hz)2.2 µV / √ Hz-113 dB[1]
      Spectral noise (10 Hz)0.2 MV / √ Hz-134 dB[1]
      spectral noise (100 Hz)0.1 µV / √ Hz-140 dB[1]
      Spectral noise (1,000 Hz)0.04 µV / √ Hz-148 dB[1]
      spectral noise (10,000 Hz)0.03 µV / √ Hz-150 dB[1]
      Discharging charging time constant1.0 s
      minimal resistance at the sensor input70 M & OMEGa;[2]
      influence of the input capacitance (sensor + cable) on transcription factor0.00≤5 %/pF
      physical properties
      parts usematerialstainless steel
      sealwelded
      electrical connection (input)10-32-coaxial socket
      Electrical connection (output)BNC Plug
      size - diameter0.52 in13 mm
      Size - length3.4 in86 mm
      weight1.1 oz31 grams
      notes
      [1]tested with a Voltage source and a capacitor (to simulate of a sensor)
      [2]no use with low-impedance input resistors possible (especially not suitable for sensors, the) Are exposed to temperatures above?200 ? C)
      [3]details: see PCBs Declaration of conformance PS024. CE-conformity & auml; t can only be guaranteed if the housing is earthed.
      (T) TEDS memory in accordance with IEEE PP1451. 4
      temperature range-40 … 185 ° F-40 … 85 ° C
      Bias voltage13.35 … 14.85 V DC
      PCB-422E05

      Specific References

      Download

      422E05_drawing.PDF

      Technical drawing

      Download (106.46k)

      422E05_manual.PDF

      Operating instructions

      Download (373.05k)

      422E05_specs.PDF

      Technical data sheet

      Download (72.3k)