PCB-482C26
| basic data | |||
| number channels | 4 | ||
| sensor type | ICP, voltage | ||
| precision (Verstä rkungsfaktor 0, 1 x 0, 4 x) | ≤5% | ||
| (amplification factor 0, 5 x to 200x) accuracy | ≤1% | ||
| output range | ±10 V | ||
| Frequency range (-5%) (Amplification factor 0, 1 x 99, 9 x) | 0.05 … 100,000 Hz | ||
| Frequency range (-5%) (Gain 100 x to 200x) | 0.05 … 50,000 Hz | ||
| Phase shift (at 1,000 Hz) | ±1 ° | ||
| crosstalk (maximum) | -72 dB | ||
| TEDS reader function | Yes | ||
| bias voltage/error (via LEDs) display | Open circuit/short circuit/overload | ||
| Manual | |||
| operating | keypad | ||
| digital display | 2 lines, 16 characters | ||
| digital interface | |||
| Digital interface | |||
| Digital interface:Data rate | 19.200 bps | ||
| digital interface: start, stop, parity | 1, 8, 1, no | ||
| digital interface: handshake | RTS/CTS | ||
| digital interface: cable length (max) | 50 ft | 15.2 m | |
| conditions | |||
| temperature range (operation) | 32 … 120 ° F | 0 … 50 ° C | |
| specifications | |||
| power supply (for supplied AC adaptor) | AC | ||
| Mains voltage (50 … 60 Hz) | 100 … 240 V AC | ||
| power consumption (power supply) | 1.6 A | ||
| Power supply (sensor power supply unit) | DC voltage | ||
| power supply (sensor power supply unit) | 9 … 18 V DC | ||
| Power consumption (sensor power supply unit) | ≤2.5 A | ||
| supply voltage (for sensor) | 24 V DC | ||
| Constant power supply (for sensor) | 0 … 20 mA | [1] | |
| 10 V pk | Overload threshold (±0. 2 V pk) | ||
| DC Offset | ≤50 mV | ||
| output impedance | ≤50Ω | ||
| wide band noise (1 …) 10,000 Hz) (amplification factor 1 x) | 50.0 µV rms | [2] | |
| spectral noise (1 Hz) (amplification factor 1 x) | 8.0 µV / √Hz | [2] | |
| Spectral noise (10 Hz) (amplification factor 1 x) | 1.5 µV / √Hz | [2] | |
| spectral noise (100 Hz) (amplification factor 1 x) | 1.0 µV / √Hz | [2] | |
| spectral noise (1,000 Hz) (amplification factor 1 x) | 1.0 µV / √Hz | [2] | |
| spectral noise (10,000 Hz) (Verstä rkungsfaktor 1 x) | 1.0 µV / √Hz | [2] | |
| wide band noise (1 … 10,000 Hz) (amplification factor x 10) | 75.0 µV rms | [2] | |
| Spectral noise (1 Hz) (amplification factor x 10) | 20.0 µV / √Hz | [2] | |
| spectral noise (10 Hz) (amplification factor x 10) | 1.5 µV / √Hz | [2] | |
| spectral noise (100 Hz) (amplification factor x 10) | 1.0 µV / √Hz | [2] | |
| spectral noise (1,000 Hz) (Verstä rkungsfaktor 10 x) | 1.0 µV / √Hz | [2] | |
| spectral noise (10,000 Hz) (amplification factor x 10) | 1.0 µV / √Hz | [2] | |
| Wide band noise (1 … 10,000 Hz) (gain 100 x) | 350 µV rms | [2] | |
| Spectral noise (1 Hz) (gain 100 x) | 100,0 µV / √Hz | [2] | |
| spectral noise (10 Hz) (gain 100 x) | 10.0 µ V / ? Hz | [2] | |
| spectral noise (100 Hz) (gain 100 x) | 8.0 µV / √Hz | [2] | |
| spectral noise (1,000 Hz) ( Gain 100 x) | 6.0 µV / √Hz | [2] | |
| spectralNoise (10,000 Hz) (gain 100 x) | 6.0 µV / √Hz | [2] | |
| physical properties | |||
| electrical connection (ICP® sensor input) | BNC-connector | ||
| Electrical connection (output) | BNC Jack | ||
| electrical connection (DC power supply) | 6-pin mini DIN socket | ||
| Anschlusskonnektor (RS-232 digital interface) | DB-9 connector | ||
| size - height | 3.2 in | 8.1 cm | |
| Size - width | 8.0 in | 20 cm | |
| size - deep | 5.9 in | 15 cm | |
| mass | 2.00 lb | 908 grams | |
| Notes | |||
| [1] | configurable, default setting at the factory: 4 mA (±1. 0 mA). The channels can individually be configured. | ||
| [2] | typically | ||
| [3] | details: see PCB Declaration of Conformance PS024 | ||
| includedAccessories | |||
| 017AXX | cord | -1 | |
| 100-7.103-50 | connection cable, length 1.8 metres, 9-pin male to 9-pin female- | -1 | |
| 488 B 14/NC | power supply | -1 | |
| EE75 | Configuration software "MCSC" | -1 | |
| additional information | |||
| Verstä reinforcing | 0, 1 x …?200 ? |
PCB-482C26
