PCB-480E09
- Battery-powered 1-channel power supply unit,
- Input: ICP®,
- Amplification factors 1 x, 10 x and 100 x,
- BNC input and output
| basic data | |||
| number channels | 1 | ||
| frequency range (amplification factor 1 x or 10 x) (-5%) | 0.15 … 100,000 Hz | [2] | |
| (Gain 100 x) frequency range (-10%) | 0.15 … 50,000 Hz | [1] | |
| voltage gain (±2%, range 1) | 1 x | ||
| Voltage gain (±2%, range 2) | 10 x | ||
| voltage gain (±2%, range 3) | 100 Ω | ||
| Bias voltage/error display | Centre 13 V DC (± 1 V) | ||
| conditions | |||
| Temperature range | 32 … 120 ° F | 0 … 50 ° C | |
| specifications | |||
| power supply (for sensor) | 25 … 29 V DC | [4] | |
| constant power supply (for sensor) | 2.0 … 3.2 mA | [6] | |
| discharging charging time constant | > 7 s | [5] | |
| DC offset (max) | < 30 mV | [5] | |
| spectral noise (amplification factor 1 x) (1 Hz) | 0.25 µV / √Hz | 132 dB | |
| Spectral noise (amplification factor 1 x) (10 Hz) | 0.07 µV / √Hz | 143 dB | |
| spectral noise (amplification factor 1 x) (100 Hz) | 0.05 µV / √Hz | -146 dB | |
| spectral noise (amplification factor 1 x) (1,000 Hz) | 0.04 µV / √Hz | -148 dB | |
| spectral noise (Verstä rkungsfaktor 1 x) (10,000 Hz) | 0.03 µV / √Hz | -150 dB | |
| wide band noise (amplification factor 1 x) (1 … 10,000 Hz) | 3.25 µV rms | -110 dB/rms | |
| Spectral noise (amplification factor 10 x) (1 Hz) | 2.2 µV / √Hz | -113 dB | |
| spectral noise (amplification factor 10 x) (10 Hz) | 2.0 µV / √Hz | 114 dB | |
| spectral noise (10 x gain) (100 Hz) | 1.1 µV / √Hz | -119 dB | |
| spectral noise ( Amplification factor10 x) (1,000 Hz) | 0.55 µV / √Hz | -125 dB | |
| spectral noise (10 x gain) (10,000 Hz) | 0.3 µV / √Hz | -130 dB | |
| Wide band noise (amplification factor 10 x) (1 … 10,000 Hz) | 49 µV/rms | -86 dB/rms | |
| spectral noise (gain 100 x) (1 Hz) | 20 µV /√Hz | -94 dB | |
| spectral noise (gain 100 x) (10 Hz) | 19 µV / √Hz | -94 dB | |
| spectral noise (Verstä rkungsfaktor 100 x) (100 Hz) | 12 µV / √Hz | -98 dB | |
| spectral noise (gain x 100) (1,000 Hz) | 5.5 µV / √Hz | 105 dB | |
| Spectral noise (gain x 100) (10,000 Hz) | 2 µV / √Hz | 114 dB | |
| wide band noise (gain 100 x) (1 … 10,000 Hz) | 569 µV/rms | -65 dB/rms | |
| power supply (standard) | batteries | ||
| number of batteries | 3 | ||
| Battery type | 9V block battery | ||
| 50 hours | battery life (alkaline) | ||
| (alternative) power supply | external DC power supply | ||
| Power | 18 … 30 V DC | [3] [4] | |
| power consumption | 15 mA | [3] | |
| Physical properties | |||
| Electrical connection (sensor input) | BNC Jack | ||
| Electrical connection (output) | BNC Jack | ||
| electrical connection (external DC voltage supply) | 3, 5 mm jack plug | ||
| Electrical connection (charger) | Switchcraft Jack #722 | ||
| size - deep | 2.4 in | 6.1 cm | |
| Size - height | 4.0 in | 10 cm | |
| Size - width | 2.9 in | 7.4 cm | |
| weight (with batteries) | 0.7 lb | 0.3 kg | |
| notes | |||
| [1] | For serial numbers of 24.699 (previously 100,000 Hz) | ||
| [2] | lower limiting frequency specified for an output load impedance of 1 MΩ | ||
| [3] | when using an external DC power supply | ||
| [4] | when using a power supply, the sensor supply voltage is limited by the voltage provided by the PSU. | ||
| [5] | 1 MΩs output load | ||
| [6] | limited by an internal DC power diode | ||
| [7] | details: see PCBs Declaration of conformance PS024 | ||
| (R) rechargeable version incl. rechargeable batteries and charger | |||
| Number of battery | 3 | ||
| battery type | 9V battery pack | ||
| battery life | 20 hours | ||
| Additional information | |||
| number of channels | 16 | ||
| equipment | customisable | ||
| sensor types | ICP® Optional: voltage, charge | ||
| number of channels | 16 | ||
| equipment | simple default configuration | ||
| Number of channels | 16 | ||
| equipment | default configuration with multiple options, E.g. digital display, filter, adjustable amp gain |
PCB-480E09
