PCB-086C03
zoom_out_map

PCB-086C03

  • Impact hammer with integrated ICP® force sensor,
  • Hammer mass 0.16 kg,
  • Force application to 2.200 N,
  • Sensitivity 2.25 mV / N,
  • Including Hammer tips, additional mass and carrying case
basic data
Sensitivity (± 15%) 10 mV / lbf 2.25 mV / N
measuring range ± 500 lbf pk ± 2,224 N pk
resonant frequency ≥22.000 Hz
linearity error ≤1%
Technical characteristics
supply voltage 20 ... 30 V DC
Constant current supply 2 ... 20 mA
output impedance <100 Ω [1]
Bias voltage 8 ... 14 V DC
discharging ≥2.000 s [1]
physical properties
sensor element quartz
seal epoxy resin
hammer mass 0.34 lb 0.16 kg
Diameter of the head 0.62 in 1.57 cm
Diameter of Hammer tips 0.25 in 0.63 cm
hammer length 8.5 in 21.6 cm
connection On the bottom
additional mass 2.6 oz 75 grams
electrical connection BNC connector
Hints
[1] typically,
[2] Details: see PCB Declaration of Conformance PS068
included supply
081B05 Mounting bolts (10-32 to 10-32) -2
084A08 Additional mass - Steel, 0.6 "diameter -1
084B03 Hammer tip - hard (steel) -1
084B04 Hammer tip - medium (white plastic) -1
084C05 Hammer tip - soft (black) -2
084C11 Hammer tip - especially soft (red) -2
085A10 Vinyl cover for medium-hammer tip (blue) -2
HCS-2 Calibration of the impact hammer Series 086 -1
(T) TEDS memory IEEE PP1451.4
(TLD) TEDS memory according to IEEE P1451.4
PCB-086C03

Specific References

Download

086C03_drawing.PDF

Technical drawing

Download (69.03k)

086C03_manual.PDF

Operating instructions

Download (695.43k)

086C03_specs.PDF

Technical data sheet

Download (63.05k)