PCB-HT(M)354C03
zoom_out_map

PCB-HT(M)354C03

  • Triaxial ICP® high-temperature vibration sensor,
  • Continuous use temperature up to 163 ° C,
  • With through hole,
  • Masseisoliert,
  • Measurement range 50 g,
  • Sensitivity 100 mV/g,
  • Frequency range 0.5 … 2,000 Hz,
  • 4-pin female connector on the side
  • basic data
    sensitivity (±10%) 100 mV/g 10.2 mV/(m/s²)
    range ±50 g pk ±490 m/s 2 pk
    frequency range (±5%) 10 … 2,000 Hz
    Frequency range (± 10%) 8 … 4,000 Hz
    frequency range (± 3 dB) 5 … 6,000 Hz
    resonance frequency ≥ 12,000 Hz
    wide band resolution 0.0004 g RMS 0.004 m/s² RMS [1]
    linearity ≤ 1% [2]
    transverse acceleration sensitivity ≤ 5% [3]
    Conditions of use
    Overload limit (shock) ±5. 000 g pk ±49. 050 m/s² pk
    Temperature range 65… 325 ° F -54 … 163 ° C
    strain sensitivity (footprint) 0.005 g/µε 0.05 (m/s²)/µε [1]
    Technical characteristics
    supply 21 … 30 V DC
    constant power supply 2 … 20 mA
    Output impedance ≤ 300 Ω
    Bias voltage 10 … 14,5 V DC
    Discharging charging time constant 0.04 … 0.2 s
    settling time < br(auf Bias-Spannung ±10 %) >12s
    Spectral noise (1 Hz) 200 µg / √ Hz 1.961 (µm / s ²) / √ Hz [1]
    spectral noise (10 Hz) 75 µg / √ Hz 735 ( µm / s ²) / √ Hz [1]
    spectral noise (100 Hz) 20 µg / √ Hz 196 (µm / s ²) / √ Hz [1]
    spectral noise ( 1,000 Hz) 8 µg / √ Hz 79 (µm / s ²) / √ Hz [1]
    electrical insulation (base) ≥ 100 MΩ
    physical properties
    Sensor element ceramic
    geometry of the sensor element shear principle
    housing material titanium
    Sealing hermetically sealed welded
    size - hex 0,815 in 20.7 mm
    Size - height 0.45 in 11.4 mm
    Mass 0.55 oz 15.5 grams [1]
    wiring 1/4 "-28 4-pin
    " Connecting position side
    mounting hole
    notes
    [1] typically
    [2] zero-based balancing line, determined using the method of least squares
    [3] transverse acceleration sensitivity typically≤ 3%
    [4] details: see PCBs Declaration of conformance PS023
    equipment
    039A23 Inbusschlü wrench, 5/32 "hex -1
    080A109 mounting wax -1
    081 B 60 insulated Mounting screw, 10-32 thread x 5/8 "long (for model 354 C 02) -1
    ACS-1 T frequency response for Triaxial accelerometer, rückfü hrbar on NIST, 10 Hz up to the upper 5% frequency -1
    (M) metric mounting
    equipment
    M039A23 are üssel, 4 mm hex -1
    M081B60 metric mounting screw -1
    additional information
    features Earth free mounting with round screw
    PCB-HT(M)354C03

    Specific References

    Download

    354C03_drawing.PDF

    Technical drawing

    Download (44.05k)

    354C03_specs.PDF

    Technical data sheet

    Download (103.19k)

    HT354C03_manual.PDF

    Operating instructions

    Download (1.76M)