PCB-(M)108A02
- ICP® pressure sensor with ceramic-coated Cone,
- For hydraulic applications,
- Measuring range 68.950 kPa,
- Sensitivity 0.073 mV / kPa,
- Lower limiting frequency 0.01 Hz,
- 10-32 female connector
basic data | |||
Measurement range (output range ± 5 V) | 10,000 psi | 68,950 kPa | |
Usable overload range (output range is ± 10 V) | 20,000 psi | 137,900 kPa | [1] |
Sensitivity (± 15%) | 0.5 mV / psi | 0.073 mV / kPa | |
Maximum static pressure | 50,000 psi | 344,750 kPa | |
resolution | 0.2 psi | 1.4 kPa | |
resonant frequency | ≥250.000 Hz | ||
Rise time (reflected pressure) | ≤2 microseconds | ||
Lower limit frequency (-5%) | 0.01 Hz | ||
linearity error | ≤2% FS | [2] | |
Operating conditions | |||
acceleration sensitivity | ?0,05 psi / g | ?0,035 kPa / (m / s) | |
The temperature range (operation) | -100 ... 275 ° F | -73 ... 135 ° C | |
Temperature coefficient of sensitivity | ?0,10% / ° F | ?0,18% / ° C | |
maximum acceleration | 2000 g pk | 19,614 m / spk | |
Maximum shock resistance | 20,000 g pk | 196,140 m / s pk | |
Technical characteristics | |||
Output polarity (positive pressure) | positive | ||
Discharging time (at room temperature) | ?50 s | ||
supply voltage | 20 ... 30 V DC | ||
Constant current supply | 2 ... 20 mA | ||
output impedance | ≤100 Ω | ||
Bias voltage | 8 ... 14 V DC | ||
physical properties | |||
Geometry of the sensor element | compression principle | ||
sensor element | quartz | ||
housing material | C-300 | ||
membrane | C-300 | ||
seal | Hermetically sealed | ||
electrical connection | 10-32 coaxial | ||
Dimensions | 0.42 oz | 12 grams | |
Hints | |||
[1] | For an output range up to 10 V, the supply voltage at least 24 V has to DC , respectively. At low bias voltage of the sensor, no negative output range up to -10 V can be used. | ||
[2] | Zero-based line of best fit, determined by the method of least squares | ||
[3] | Details: see PCB Declaration of Conformance PS023 | ||
included supply | |||
065A06 | Seal ring, 0.318 "outside x 0.250" x 0.010 inner "high, 316L (stainless steel) | -3 | |
(M) Metric assembly |