PCB-M261B02
Triax force link, ICP®, 1000 lb (Fx,y,z), 2.5 mV/lb (z), 5.0 mV/lb (x,y), ground isolated
WPL 88 - Improved Stiffness Specifications for Piezoelectric Force Links- Temperature Range: -65 to +250 °F (-54 to +121 °C)
- Electrical Connector: 4-Pin
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB White Paper WPL_88_1121 for details.
[4] See PCB Declaration of Conformance PS023 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±20 %) (Z Axis) | 2.5 mV/lb | 0.56 mV/N | |
| Sensitivity (±20 %) (X or Y Axis) | 5 mV/lb | 1.12 mV/N | |
| Measurement Range (Z Axis) | 1000 lb | 4.45 kN | |
| Measurement Range (X or Y Axis) | 1000 lb | 4.45 kN | |
| Maximum Force (Z Axis) | 1320 lb | 5.87 kN | |
| Maximum Force (X or Y Axis) | 1,100 lb | 4.89 kN | |
| Maximum Moment (Z Axis) | 40 ft-lb | 54.2 Nm | |
| Maximum Moment (X or Y Axis) | 70 ft-lb | 94.9 Nm | |
| Broadband Resolution (X or Y axis) | 0.006 lb-rms | 0.027 N-rms | [2] |
| Broadband Resolution (X or Y axis) | 0.006 lb-rms | 0.027 N-rms | [2] |
| Low Frequency Response (-5 %) (Z-Axis) | 0.01 Hz | 0.01 Hz | |
| Low Frequency Response (-5 %) (X or Y axis) | 0.001 Hz | 0.001 Hz | |
| Non-Linearity | ≤1 % FS | ≤1 % FS | [1] |
| Cross Talk (between X and Y Axis) | ±3 % | ±3 % | |
| Cross Talk (between (X or Y axis) and Z Axis) | ±5 % | ±5 % | |
| Environmental | |||
| Temperature Range | -65 to +250 °F | -54 to +121 °C | |
| Electrical | |||
| Full Scale Output (Z Direction) | ±2.5 VDC | ±2.5 VDC | |
| Full Scale Output (X and Y Direction) | ±5 VDC | ±5 VDC | |
| Discharge Time Constant (Z axis) | ≥50 sec | ≥50 sec | |
| Discharge Time Constant (X or Y axis) | ≥500 sec | ≥500 sec | |
| Excitation Voltage (all channels) | 20 to 30 VDC | 20 to 30 VDC | |
| Constant Current Excitation (all channels) | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | ≤100 Ohm | ≤100 Ohm | |
| Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
| Spectral Noise (1 ) | .001 lb/√Hz | .0044 N√Hz | |
| Spectral Noise (10 ) | .0003 lb/√Hz | .00143 N√Hz | |
| Spectral Noise (100 ) | .00008 lb/√Hz | .000366 N√Hz | |
| Spectral Noise (1000 ) | .00002 lb/√Hz | .000082 N√Hz | |
| Spectral Noise (1 ) | .002 lb/√Hz | .0104 N√Hz | |
| Spectral Noise (10 ) | .0006 lb/√Hz | .00256 N√Hz | |
| Spectral Noise (100 ) | .0002 | .00074 | |
| Spectral Noise (1000 ) | .00005 lb/√Hz | .000227 N√Hz | |
| Output Polarity | Positive | Positive | |
| Electrical Isolation | ≥100000000 Ohm | ≥100000000 Ohm | |
| Physical | |||
| Stiffness (X or Y Axis) | 2.9 lb/µin | 510 N/µm | [2] |
| Stiffness (Z Axis) | 7.2 lb/µin | 1260 N/µm | [2] |
| Stiffness (RX or RY Axis) | 2.8 E6 lbf*in/radian | 3.2E5 N*m/radian | [2] [3] |
| Stiffness (RZ Axis) | 9.4 E5 lbf*in/radian | 1.1E5 N*m/radian | [2] [3] |
| Coupled Stiffness (X or Y Axis) | 2.5 lbf*in/µin | 11 N*m/µm | [2] [3] |
| Weight | 34.40 oz | 975 gm | |
| Housing Material | Stainless Steel | Stainless Steel | |
| Sealing | Hermetic | Hermetic | |
| Electrical Connector | 4-Pin | 4-Pin | |
| Electrical Connection Position | Side | Side | |
* All specifications are at room temperature unless otherwise specified.
Optional Versions
(W) Water Resistant Cable
| English | SI | |
|---|---|---|
| Electrical Connection Position | Side | |


