PCB-J356A03
    zoom_out_map

      PCB-J356A03

      Triaxial, lightweight miniature, ceramic shear ICP® accel., 10 mV/g, 0.25" cube, ground isolated

      • Sensitivity: (±20%)10 mV/g (1.02 mV/(m/s²))
      • Measurement Range: ±500 g pk (±4905 m/s² pk)
      • Electrical Connector: Integral Cable

      Specification Notes

      [1] Zero-based, least-squares, straight line method.
      [2] Typical.
      [3] See PCB Declaration of Conformance PS023 for details.

      English:SI:
      Performance
      Sensitivity (±20 %)10 mV/g1.02 mV/(m/s²)
      Measurement Range±500 g pk±4905 m/s² pk
      Frequency Range (±5 %) (y or z axis)2 to 8000 Hz2 to 8000 Hz
      Frequency Range (±5 %) (x axis)2 to 5000 Hz2 to 5000 Hz
      Frequency Range (+1 dB) (x axis)≥8 kHz≥8 kHz
      Resonant Frequency≥50 kHz≥50 kHz
      Broadband Resolution (1)0.003 g rms0.03 m/s² rms [2]
      Non-Linearity≤1 %≤1 % [1]
      Transverse Sensitivity≤5 %≤5 %
      Environmental
      Overload Limit (Shock)±5000 g pk±49050 m/s² pk
      Temperature Range (Operating)-65 to +250 °F-54 to +121 °C
      Temperature ResponseSee Graph %/°FSee Graph %/°F [2]
      Electrical
      Excitation Voltage22 to 30 VDC22 to 30 VDC
      Constant Current Excitation2 to 20 mA2 to 20 mA
      Output Impedance≤200 Ohm≤200 Ohm
      Output Bias Voltage9 to 16 VDC9 to 16 VDC
      Discharge Time Constant0.24 to 1.0 sec0.24 to 1.0 sec
      Settling Time (within 10% of bias)<3 sec<3 sec
      Spectral Noise (1 Hz)1200 µg/√Hz11772 (µm/sec2)/√Hz [2]
      Spectral Noise (10 Hz)300 µg/√Hz2943 (µm/sec2)/√Hz [2]
      Spectral Noise (100 Hz)100 µg/√Hz981 (µm/sec2)/√Hz [2]
      Spectral Noise (1 kHz)30 µg/√Hz294 (µm/sec2)/√Hz [2]
      Physical
      Sensing ElementCeramicCeramic
      Sensing GeometryShearShear
      Housing MaterialTitaniumTitanium
      SealingHermeticHermetic
      Size - Height0.25 in6.35 mm
      Size - Length0.25 in6.35 mm
      Size - Width0.25 in6.35 mm
      Weight (without cable)0.04 oz1.0 gm [2]
      Electrical ConnectorIntegral CableIntegral Cable
      Electrical Connection PositionSideSide
      Cable Termination1/4-28 4-Pin Jack1/4-28 4-Pin Jack
      Cable Length5 ft1.5 m
      Cable Type034 4-cond Shielded034 4-cond Shielded
      MountingAdhesiveAdhesive

      * All specifications are at room temperature unless otherwise specified.

      TempChart

      Accessories

      Supplied
      034G054-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z)1
      080A109Petro Wax, one square, 1" x 1" x 0.25"1
      080A90Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)1
      ACS-1TTriaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable1

      Optional Versions

      (J) Ground Isolated

      EnglishSI
      Weight.04 oz1.2 gm
      Size - Height.28 in7.10 mm
      Size - Width.28 in7.10 mm
      Electrical Isolation>100000000 Ohm
      Size - Length.28 in7.10 mm

      (TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

      EnglishSI
      Excitation Voltage23 to 30 VDC23 to 30
      Output Bias Voltage9.5 to 17 VDC9.5 to 17

      (W) Water Resistant Cable

      EnglishSI
      Electrical ConnectorSealed Integral Cable
      PCB-J356A03

      Specific References

      Download

      j356a03_j_specs.pdf

      PCB-J356A03_specs

      Download (42.58k)

      j356a03_j_manual.pdf

      PCB-J356A03_manual

      Download (42.58k)

      j356a03_drawings.pdf

      PCB-J356A03_drawings

      Download (2.22M)