PCB-HTTLD356A02
Triaxial, general purpose, ceramic shear ICP® accel., 10 mV/g, 1 to 5k Hz, 14 mm cube size, 4-pin conn., +325 F operating temp, TEDS 1.0
- Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
- Measurement Range: ±500 g pk (±4900 m/s² pk)
- Electrical Connector: 1/4-28 4-Pin
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] 250° F to 325° F data valid with HT option only.
[2] Typical.
[4] TEDS option adds 1.0 VDC to bias voltage.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±10 %) | 10 mV/g | 1.02 mV/(m/s²) | |
| Measurement Range | ±500 g pk | ±4900 m/s² pk | |
| Frequency Range (±5 %) | 1 to 5000 Hz | 1 to 5000 Hz | |
| Frequency Range (±10 %) | 0.5 to 6000 Hz | 0.5 to 6000 Hz | |
| Resonant Frequency | ≥25 kHz | ≥25 kHz | |
| Broadband Resolution (1) | 0.0005 g rms | 0.005 m/s² rms | [2] |
| Non-Linearity (400 g, 3920 m/s²) | ≤1 % | ≤1 % | [1] |
| Non-Linearity (500 g, 4900 m/s²) | ≤2 % | ≤2 % | [1] |
| Transverse Sensitivity | ≤5 % | ≤5 % | |
| Environmental | |||
| Overload Limit (Shock) | ±7000 g pk | ±68600 m/s² pk | |
| Temperature Range (Operating) | -65 to +250 °F | -54 to +121 °C | [3] |
| Temperature Response | See Graph %/°F | See Graph %/°F | [2] [3] |
| Base Strain Sensitivity | 0.001 g/µε | 0.01 (m/s²)/µε | [2] |
| Electrical | |||
| Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | ≤200 Ohm | ≤200 Ohm | |
| Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | |
| Discharge Time Constant | 0.6 to 2.0 sec | 0.6 to 2.0 sec | |
| Settling Time (within 10% of bias) | <5 sec | <5 sec | |
| Spectral Noise (1 Hz) | 150 µg/√Hz | 1472 (µm/sec2)/√Hz | [2] |
| Spectral Noise (10 Hz) | 25 µg/√Hz | 245 (µm/sec2)/√Hz | [2] |
| Spectral Noise (100 Hz) | 10 µg/√Hz | 98 (µm/sec2)/√Hz | [2] |
| Spectral Noise (1 kHz) | 5 µg/√Hz | 49 (µm/sec2)/√Hz | [2] |
| Physical | |||
| Sensing Element | Ceramic | Ceramic | |
| Sensing Geometry | Shear | Shear | |
| Housing Material | Titanium | Titanium | |
| Sealing | Hermetic | Hermetic | |
| Size - Height | 0.55 in | 14.0 mm | |
| Size - Length | 0.80 in | 20.3 mm | |
| Size - Width | 0.55 in | 14.0 mm | |
| Weight | 0.37 oz | 10.5 gm | [2] |
| Electrical Connector | 1/4-28 4-Pin | 1/4-28 4-Pin | |
| Electrical Connection Position | Side | Side | |
| Mounting Thread | 10-32 Female | 10-32 Female | |
| Mounting Torque | 10 to 20 in-lb | 113 to 225 N-cm | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| M081B05 | Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu | 1 |
| 080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
| 080A12 | Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insolation hardcoat finish | 1 |
| 080A90 | Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) | 1 |
| 081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 1 |
| ACS-1T | Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable | 1 |
Optional Versions
(HT) High temperature, extends normal operation temperatures
| English | SI | |
|---|---|---|
| Excitation Voltage | 22 to 30 VDC | |
| Discharge Time Constant | 0.5 to 1.5 sec | |
| Temperature Range | -65 to +325 °F | -54 to +163 °C |
| Spectral Noise | 400 µg/√Hz | 3920 (µm/sec2)/√Hz |
| Broadband Resolution | 0.0008 g rms | 0.008 µm/sec2 rms |
| Frequency Range (±10 %) | 0.7 to 6000 Hz | |
| Spectral Noise | 50 µg/√Hz | 490 (µm/sec2)/√Hz |
| Frequency Range (±5 %) | 1 to 5000 Hz | |
| Spectral Noise | 25 µg/√Hz | 245 (µm/sec2)/√Hz |
| Output Bias Voltage | 7 to 15 VDC | |
| Spectral Noise | 6 µg/√Hz | 58.8 (µm/sec2)/√Hz |
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
| English | SI | |
|---|---|---|
| Output Bias Voltage | 8.5 to 13.0 VDC | |
| Temperature Range | -65 to +250 °F | -54 to +121 °C |
(TLA) TEDS LMS International - Free Format
| English | SI | |
|---|---|---|
| Temperature Range | -65 to +250 °F | -54 to +121 °C |
| Output Bias Voltage | 8.5 to 13.0 VDC | |
(TLB) TEDS LMS International - Automotive Format
| English | SI | |
|---|---|---|
| Temperature Range | -65 to +250 °F | -54 to +121 °C |
| Output Bias Voltage | 8.5 to 13.0 VDC | |
(TLC) TEDS LMS International - Aeronautical Format
| English | SI | |
|---|---|---|
| Temperature Range | -65 to +250 °F | -54 to +121 °C |
| Output Bias Voltage | 8.5 to 13.0 VDC | |
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
| English | SI | |
|---|---|---|
| Temperature Range | -65 to +250 | -54 to +121 |
| Output Bias Voltage | 8.5 to 13.0 | |
PCB-HTTLD356A02
