PCB-HT356A43
Triaxial ICP® accelerometer, 10 mV/g, 500 g, 1/4-28 4-pin connector, Adhesive mount, TEDS 1.0, Temp. to +325 °F
- Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
- Measurement Range: ±500 g pk (±4905 m/s² pk)
- Frequency Range: (+/-10%)0.4 to 10000 Hz
- Electrical Connector: 1/4-28 4-Pin
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±10 %) | 10 mV/g | 1.02 mV/(m/s²) | |
| Measurement Range | ±500 g pk | ±4905 m/s² pk | |
| Frequency Range (+/-5 %) | 0.7 to 7000 Hz | 0.7 to 7000 Hz | |
| Frequency Range (+/-10 %) | 0.4 to 10000 Hz | 0.4 to 10000 Hz | |
| Resonant Frequency | ≥30 kHz | ≥30 kHz | |
| Broadband Resolution (1) | 0.0008 g rms | .008 m/s² rms | [2] |
| Non-Linearity | 1 % | 1 % | [1] |
| Transverse Sensitivity | ≤6 % | ≤6 % | |
| TEDS Compliant (Per IEEE 1451.4) | Yes | Yes | |
| Environmental | |||
| Overload Limit (Shock) | ±5000 g pk | ±49050 m/s² pk | |
| Temperature Range (Operating) | -65 to 250 °F | -54 to 121 °C | |
| Temperature Response | See Graph | See Graph | [2] |
| Base Strain Sensitivity | .001 g/µε | .01 (m/s²)/µε | [2] |
| Electrical | |||
| Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | ≤200 Ohm | ≤200 Ohm | |
| Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | |
| Discharge Time Constant | 0.8 to 2.4 sec | 0.8 to 2.4 sec | |
| Settling Time (within 10% of bias) | ≤5 sec | ≤5 sec | |
| Spectral Noise (1 Hz) | 300 µg/√Hz | 2943 (µm/sec2)/√Hz | [2] |
| Spectral Noise (10 Hz) | 50 µg/√Hz | 491 (µm/sec2)/√Hz | [2] |
| Spectral Noise (100 Hz) | 35 µg/√Hz | 343 (µm/sec2)/√Hz | [2] |
| Spectral Noise (1 kHz) | 8 µg/√Hz | 79 (µm/sec2)/√Hz | [2] |
| Physical | |||
| Sensing Element | Ceramic | Ceramic | |
| Sensing Geometry | Shear | Shear | |
| Housing Material | Titanium | Titanium | |
| Sealing | Hermetic | Hermetic | |
| Size - Height | 0.40 in | 10.2 mm | |
| Size - Length | 0.75 in | 19.1 mm | |
| Size - Width | 0.40 in | 10.2 mm | |
| Weight | 0.15 oz | 4.2 gm | [2] |
| Electrical Connector | 1/4-28 4-Pin | 1/4-28 4-Pin | |
| Electrical Connection Position | Side | Side | |
| Mounting | Adhesive | Adhesive | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| 080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
| 080A90 | Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) | 1 |
| ACS-1T | Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable | 1 |
Optional Versions
(HT) High temperature, extends normal operation temperatures
| English | SI | |
|---|---|---|
| Sensitivity (+/-10 %) | 10 mV/g | 1.02 mV/(m/s²) |
| Frequency Range (+/-10 %) | 1.1 to 10000 Hz | |
| Discharge Time Constant | .3 to .9 sec | |
| Temperature Range | -65 to 325 °F | -54 to 163 °C |
| Output Bias Voltage | 8 to 16 VDC | |
| Frequency Range (+/-5 %) | 1.6 to 7000 Hz | |
(J) Ground Isolated
| English | SI | |
|---|---|---|
| Size - Width | 0.47 in | 11.8 mm |
| Electrical Isolation | ≥100000000 Ohm | |
| Size - Height | 0.47 in | 11.8 mm |
| Size - Length | .0.78 in | 19.8 mm |
PCB-HT356A43
