PCB-8162-011A
PCB L&T In-line strain gage signal conditioner, calibrated +/- 10V and 4 to 20 mA outputs, 10 VDC excitation voltage, switch activated shunt, 12 to 28 VDC operation, IP66 enclosure, 0.01% accuracy
Strain gage signal conditioner in IP66 (NEMA 4X) enclousre operates from 12 to 28 VDC and provides 5 or 10 VDC sensor excitation. Delivers +/- 5 or +/- 10 volts and 4-20 mA output via screw terminal connections.Specification Notes
[1] User Adjustable.
[2] Filtered via 2-pole active filter.
[3] Factory Adjustable
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Electrical Filter Cutoff Frequency | 100 Hz | 100 Hz | [2] |
| Frequency Range | 0 to 1000 Hz | 0 to 1000 Hz | |
| Input Signal (sensor sensitivity) | 0.5 to 11 mV/V | 0.5 to 11 mV/V | [1] |
| Environmental | |||
| Temperature Range | +32 to +158 °F | 0 to +70 °C | |
| Enclosure Rating | NEMA 4X | IP66. | |
| Excitation Current | 60 mA | 60 mA | |
| Electrical | |||
| Excitation Voltage | 10 VDC | 10 VDC | [3] |
| Output Voltage | ±10 VDC | ±10 VDC | [3] |
| Output Current | 4 to 20 mA | 4 to 20 mA | |
| Power Required | 12 to 28 Vdc | 12 to 28 Vdc | |
| Offset Voltage (@min. gain) | ±50% of F.S. | ±50% of F.S. | |
| Offset Voltage (@max.gain) | ±70% of F.S. | ±70% of F.S. | |
| Physical | |||
| Electrical Connector (input/output) | screw terminal | screw terminal | |
| Size - Height | 3.70 in | 94.0 mm | |
| Size - Width | 2.55 in | 64.8 mm | |
| Size - Length | 2.23 in | 56.6 mm | |
* All specifications are at room temperature unless otherwise specified.
PCB-8162-011A
