PCB-8161-011A
DIN rail mount strain gage signal conditioner, +/- 10 V & 4 to 20 mA outputs, calibrated in voltage, 10 VDC bridge excitation voltage, switch activated shunt, 12 to 28 VDC operation
Specification Notes
[1] Jumper selectable.
[2] At full sensor load.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Frequency Range | 1000 Hz | 1000 Hz | |
| Non-Linearity | ±0.01 % FS | ±0.01 % FS | |
| Zero Adjust Range(Output 1) (course) | ±60 % | ±60 % | |
| Zero Adjust Range (fine) | ±10 % | ±10 % | |
| Span Adjust Range(Output 1) (course) | ±0.05 to 5 mV/V | ±0.05 to 5 mV/V | |
| Span Adjust Range (fine) | ±20 % | ±20 % | |
| 20 mA Adjust Range(Output 2.) | ±20 % | ±20 % | |
| 4 mA Adjust Range(Output 2) | ±10 % | ±10 % | |
| Environmental | |||
| Temperature Range | +32 to +158 °F | 0 to +70 °C | |
| Electrical | |||
| Excitation (Max Current) | 30 mA | 30 mA | |
| Excitation Voltage (±.05 %) (Sensor) | 10 VDC | 10 VDC | [1] |
| Output 1 (Voltage) | ±10 VDC | ±10 VDC | [1] |
| Output 2 (Current) | 4 to 20 mA | 4 to 20 mA | |
| Power Required (Current) | 60 mA | 60 mA | [2] |
| Power Required (Voltage) | 12 to 28 Vdc | 12 to 28 Vdc | |
| Physical | |||
| Size - Height | 3.35 in | 89 mm | |
| Size - Width | 0.69 in | 18 mm | |
| Mounting | 35 mm DIN Rail | 35 mm DIN Rail | |
| Size - Length | 2.27 in | 58 mm | |
* All specifications are at room temperature unless otherwise specified.
PCB-8161-011A
