PCB-356A09/NC
Triaxial, lightweight (1.0 gm) miniature, adhesive mount, ceramic shear ICP® accel., 10 mV/g, 0.25" cube, mini 4-pin connector no mating cable supplied
- Sensitivity: (±20%)10 mV/g (1.02 mV/(m/s²))
- Measurement Range: ±500 g pk (±4905 m/s² pk)
- Electrical Connector: 8-36 4-Pin (8-36 4-Pin)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
English: | SI: | ||
---|---|---|---|
Performance | |||
Sensitivity (±20 %) | 10 mV/g | 1.02 mV/(m/s²) | |
Measurement Range | ±500 g pk | ±4905 m/s² pk | |
Frequency Range (±5 %) (y or z axis) | 2 to 8000 Hz | 2 to 8000 Hz | |
Frequency Range (±5 %) (x axis) | 2 to 5000 Hz | 2 to 5000 Hz | |
Frequency Range (+1 dB) (x axis) | ≥8 kHz | ≥8 kHz | |
Resonant Frequency | ≥50 kHz | ≥50 kHz | |
Broadband Resolution (1) | 0.003 g rms | 0.03 m/s² rms | [2] |
Non-Linearity | ≤1 % | ≤1 % | [1] |
Transverse Sensitivity | ≤5 % | ≤5 % | |
Environmental | |||
Overload Limit (Shock) | ±5000 g pk | ±49050 m/s² pk | |
Temperature Range (Operating) | -65 to +250 °F | -54 to +121 °C | |
Temperature Response | See Graph %/°F | See Graph %/°F | [2] |
Electrical | |||
Excitation Voltage | 22 to 30 VDC | 22 to 30 VDC | |
Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
Output Impedance | ≤200 Ohm | ≤200 Ohm | |
Output Bias Voltage | 9 to 16 VDC | 9 to 16 VDC | |
Discharge Time Constant | 0.24 to 1.0 sec | 0.24 to 1.0 sec | |
Settling Time (within 10% of bias) | <3 sec | <3 sec | |
Spectral Noise (1 Hz) | 1200 µg/√Hz | 11772 (µm/sec2)/√Hz | [2] |
Spectral Noise (10 Hz) | 300 µg/√Hz | 2943 (µm/sec2)/√Hz | [2] |
Spectral Noise (100 Hz) | 100 µg/√Hz | 981 (µm/sec2)/√Hz | [2] |
Spectral Noise (1 kHz) | 30 µg/√Hz | 294 (µm/sec2)/√Hz | [2] |
Physical | |||
Sensing Element | Ceramic | Ceramic | |
Sensing Geometry | Shear | Shear | |
Housing Material | Titanium | Titanium | |
Sealing | Hermetic | Hermetic | |
Size - Height | 0.25 in | 6.35 mm | |
Size - Length | 0.25 in | 6.35 mm | |
Size - Width | 0.25 in | 6.35 mm | |
Weight | 0.04 oz | 1.0 gm | [2] |
Electrical Connector | 8-36 4-Pin | 8-36 4-Pin | |
Electrical Connection Position | Side | Side | |
Mounting | Adhesive | Adhesive |
* All specifications are at room temperature unless otherwise specified.
Accessories
Supplied | ||
034K10 | 4-conductor, low noise, shielded FEP cable, 10-ft, mini 4-socket plug to (3) BNC plugs (labeled X, Y, Z) | 1 |
080A109 | Petro Wax, one square, 1" x 1" x 0.25" | 1 |
080A90 | Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) | 1 |
ACS-1T | Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable | 1 |