PCB-355A44

Miniature ring-style, ceramic shear ICP® accel., 10 mV/g, 1 to 9k Hz, integral cable, case isolated

10 mV/g version of 355M73. Similar low freq spec as M355B12. 1 Hz to 9 kHz +/-5%. Temp -65 to +250 F, 20 foot integral 032 cable, case isolated. No Hydrotest required. hermetic.

Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
Measurement Range: ±500 g pk (±4905 m/s² pk)
Broadband Resolution: 0.001 g rms (0.01 m/s² rms)
Frequency Range: (±5%)1 to 5500 Hz
Sensing Element: Ceramic
Weight: .13 oz (3.6 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	10 mV/g	1.02 mV/(m/s²)
Measurement Range	±500 g pk	±4905 m/s² pk
Frequency Range (±5 %)	1 to 5500 Hz	1 to 5500 Hz
Frequency Range (±10 %)	0.8 to 15000 Hz	0.8 to 15000 Hz
Frequency Range (±3 dB)	.5 to 22000 Hz	.5 to 22000 Hz
Resonant Frequency	≥45 kHz	≥45 kHz
Broadband Resolution (500)	0.001 g rms	0.01 m/s² rms	[2]
Non-Linearity	1 %	1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit	±5000 g pk	±49050 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph	See Graph
Base Strain Sensitivity	≤0.08 g/µε	≤0.8 (m/s²)/µε	[2]
Electrical
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤300 Ohm	≤300 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Discharge Time Constant	0.4 to 1.5 sec	0.4 to 1.5 sec
Settling Time (within 10% of bias)	≤15 sec	≤15 sec
Spectral Noise (10 Hz)	10 µg/√Hz	98 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	5 µg/√Hz	47 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	5 µg/√Hz	47 (µm/sec²)/√Hz	[2]
Spectral Noise (10 kHz)	5 µg/√Hz	47 (µm/sec²)/√Hz	[2]
Electrical Isolation (Case)	≥100000000 Ohm	≥100000000 Ohm
Physical
Size - Height	.32 in	8.1
Size - Length	0.94 in	23.8 mm
Size - Width	0.46 in	11.7 mm
Weight (without cable)	.13 oz	3.6 gm	[2]
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Electrical Connector	Sealed Integral Cable	Sealed Integral Cable
Electrical Connection Position	Side	Side
Cable Termination	Pigtail Ends	Pigtail Ends
Cable Length	20.0 ft	6.1 m
Cable Type	2-cond Shld, 26 AWG, XLETFE Jacket	2-cond Shld, 26 AWG, XLETFE Jacket
Mounting	Through Hole	Through Hole
Mounting Torque	1 to 2 in-lb	11 to 23 N-cm