PCB-350B42/NC
ICP® Triaxial shock accelerometer, 0.1 mV/g, 50k g range, mechanically isolated and electrically filtered, 5-ft integral cable, no mating cable supplied
- Sensitivity: (±30%).1 mV/g (.01 mV/(m/s²))
- Measurement Range: ±50000 g pk (±440000 m/s² pk)
- Frequency Range: (±1dB)4 to 10000 Hz
Specification Notes
[1] Typical.
[2] Electrical filter is a second order filter.
[3] Amplitude at resonance is +9 dB.
[1] Typical.
[4] Test performed on a shaker at 100Hz
[1] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±30 %) | .1 mV/g | .01 mV/(m/s²) | |
| Measurement Range | ±50000 g pk | ±440000 m/s² pk | |
| Frequency Range (±1 dB) | 4 to 10000 Hz | 4 to 10000 Hz | |
| Resonant Frequency | >50 kHz | >50 kHz | |
| Electrical Filter Corner Frequency (3) | 17 kHz | 17 kHz | [1] [2] |
| Mechanical Filter Resonant Frequency | 35 kHz | 35 kHz | [1] [3] |
| Broadband Resolution (1) | 0.5 g rms | 4.9 m/s² rms | [1] |
| Non-Linearity (per 10,000 g (98,100 m/s²)) | 2.5 % | 2.5 % | |
| Transverse Sensitivity | ≤7 % | ≤7 % | |
| Environmental | |||
| Overload Limit (Shock) | ±150000 g pk | ±1471500 m/s² pk | |
| Temperature Range (Operating) | -10 to +150 °F | -23 to +66 °C | |
| Temperature Range (Storage) | -40 to +200 °F | -40 to +93 °C | |
| Temperature Response | See Graph %/°F | See Graph %/°F | [1] [4] |
| Base Strain Sensitivity | 0.002 g/µε | 0.02 (m/s²)/µε | [1] |
| Electrical | |||
| Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | ≤200 Ohm | ≤200 Ohm | |
| Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
| Discharge Time Constant | 0.1 sec | 0.1 sec | [1] |
| Settling Time (within 10% of bias) | <1 sec | <1 sec | |
| Electrical Isolation (Case) | >100000000 Ohm | >100000000 Ohm | |
| Physical | |||
| Sensing Element | Ceramic | Ceramic | |
| Sensing Geometry | Shear | Shear | |
| Housing Material | Titanium | Titanium | |
| Sealing | Hermetic | Hermetic | |
| Size - Height | 1.02 in | 26.0 mm | |
| Size - Length | 1.02 in | 26.0 mm | |
| Size - Width | 1.02 in | 26.0 mm | |
| Weight (without cable) | 0.95 oz | 27 g | [1] |
| Electrical Connection Position | Side | Side | |
| Cable Termination | 1/4-28 4-Pin Jack | 1/4-28 4-Pin Jack | |
| Cable Length | 5.0 ft | 1.52 m | |
| Cable Type | 034 4-cond Shielded | 034 4-cond Shielded | |
| Mounting | Through Hole | Through Hole | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| 034G05 | 4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) | 1 |
| 100-16040-40 | 1 | |
| 100-6774-10 | 1 | |
| 100-8994-40 | 1 | |
| ACS-14T | 1 | |
| ACS-22T | Triaxial amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB frequency (max 15 kHz) | 1 |
PCB-350B42/NC
