PCB-339B32
    zoom_out_map

      PCB-339B32

      UHT-12™, ICP® accelerometer, low-profile, 10 mV/g, 2 to 10k Hz, titanium housing, mini 4-pin connector, low temperature coefficient LTC , +325F Temp Rating, LP Filter

      • Electrical Filter Corner Frequency: >14 kHz
      • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
      • Measurement Range: ±500 g pk (±4905 m/s² pk)
      • Electrical Connector: 8-36 4-Pin

      Specification Notes


      [1] Typical.
      [2] See PCB Declaration of Conformance PS023 for details.

      English:SI:
      Performance
      Sensitivity (±10 %)10 mV/g1.02 mV/(m/s²)
      Measurement Range±500 g pk±4905 m/s² pk
      Frequency Range (±5 %)2 to 10000 Hz2 to 10000 Hz
      Resonant Frequency≥45 kHz≥45 kHz
      Filter TypeLow PassLow Pass
      Electrical Filter Roll-off6 dB/octave6 dB/octave
      Electrical Filter Corner Frequency>14 kHz>14 kHz
      Broadband Resolution (1).003 g rms.029 m/s² rms [1]
      Non-Linearity≤0.5 %≤0.5 %
      Transverse Sensitivity≤5 %≤5 %
      Environmental
      Overload Limit (Shock)±5000 g pk±49050 m/s² pk
      Temperature Range (Operating)-65 to +325 °F-54 to +163 °C
      Temperature ResponseSee GraphSee Graph [1]
      Temperature Coefficient of Sensitivity≤0.011 %/°F≤0.020 %/°C
      Electrical
      Excitation Voltage18 to 30 VDC18 to 30 VDC
      Constant Current Excitation2 to 20 mA2 to 20 mA
      Output Impedance≤200 Ohm≤200 Ohm
      Output Bias Voltage (Room Temperature)7 to 12 VDC7 to 12 VDC
      Discharge Time Constant0.5 to 2.0 sec0.5 to 2.0 sec
      Settling Time (within 10% of bias)<1.5 sec<1.5 sec
      Spectral Noise (1 Hz)1187 µg/√Hz11644 (µm/sec2)/√Hz [1]
      Spectral Noise (10 Hz)178 µg/√Hz1746 (µm/sec2)/√Hz [1]
      Spectral Noise (100 Hz)48 µg/√Hz471 (µm/sec2)/√Hz [1]
      Spectral Noise (1 kHz)25 µg/√Hz245 (µm/sec2)/√Hz [1]
      Physical
      Sensing ElementUHT-12™UHT-12™
      Sensing GeometryShearShear
      Housing MaterialTitaniumTitanium
      SealingHermeticHermetic
      Size - Height0.28 in7.0 mm
      Size - Length0.47 in12.0 mm
      Size - Width0.47 in12.0 mm
      Weight0.13 oz3.6 gm [1]
      Electrical Connector8-36 4-Pin8-36 4-Pin
      Electrical Connection PositionSideSide
      MountingAdhesiveAdhesive

      * All specifications are at room temperature unless otherwise specified.

      TempChart

      Accessories


      Supplied
      034K104-conductor, low noise, shielded FEP cable, 10-ft, mini 4-socket plug to (3) BNC plugs (labeled X, Y, Z)1
      080A90Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)1
      ACS-1TTriaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable1
      PCB-339B32

      Specific References

      Download

      339b32_c_specs.pdf

      PCB-339B32_specs

      Download (93.21k)

      339b32_c_manual.pdf

      PCB-339B32_manual

      Download (93.21k)

      339b32_drawings.pdf

      PCB-339B32_drawings

      Download (2.26M)