PCB-218A11
Multi-purpose charge force sensor, 5k lb comp., 500 lb tension, 18 pC/lb, axial conn.
- Sensitivity: (±15%)18 pC/lb (4046 pC/kN)
- Upper Frequency Limit: 36000 Hz
- Temperature Range: -300 to +400 °F (-184 to 204 °C)
- Mounting Thread: M7 x 0.75 - 6g
- Weight: 0.71 oz (20 gm)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Estimated using rigid body dynamics calculations.
[3] Low frequency response and system noise dependent on choice of external signal conditioning electronics.
[4] Typical.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±15 %) | 18 pC/lb | 4046 pC/kN | |
| Measurement Range (Compression) | 5000 lb | 22.24 kN | |
| Measurement Range (Tension) | 500 lb | 2.224 kN | |
| Maximum Static Force (Compression) | 8000 lb | 35.39 kN | |
| Maximum Static Force (Tension) | 750 lb | 3.336 kN | |
| Upper Frequency Limit | 36000 Hz | 36000 Hz | [2] [3] |
| Non-Linearity | ≤1 % FS | ≤1 % FS | [1] |
| Environmental | |||
| Temperature Range | -300 to +400 °F | -184 to 204 °C | |
| Temperature Coefficient of Sensitivity | ≤0.03 %/°F | ≤0.054 %/°C | |
| Electrical | |||
| Capacitance | 14 pF | 14 pF | [4] |
| Insulation Resistance | ≥1000000000000 Ohm | ≥1000000000000 Ohm | |
| Output Polarity (Compression) | Negative | Negative | |
| Physical | |||
| Stiffness | 6 lb/µin | 1.05 kN/µm | [4] |
| Size - Hex | 0.625 in | 15.88 mm | |
| Size - Height | 1.17 in | 29.72 mm | |
| Weight | 0.71 oz | 20 gm | |
| Housing Material | Stainless Steel | Stainless Steel | |
| Sealing | Epoxy | Epoxy | |
| Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
| Electrical Connection Position | Axial | Axial | |
| Mounting Thread | M7 x 0.75 - 6g | M7 x 0.75 - 6g | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| 080A81 | Thread lock adhesive (for Series 200) | 1 |
| 081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 1 |
| 084A03 | Impact cap, convex (for Series 208) | 1 |
| M081A62 | Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu | 1 |
Optional Versions
(W) Water Resistant Cable
| English | SI | |
|---|---|---|
| Electrical Connector | Integral Cable | |
| Electrical Connection Position | Side | |
PCB-218A11
