PCB-217B
Force ring, 100k lb comp., 17 pC/lb, charge output
- Sensitivity: (±15%)17 pC/lb (3822 pC/kN)
- Upper Frequency Limit: 35000 Hz
- Temperature Range: -100 to +400 °F (-73 to +204 °C)
- Weight: 12.5 oz (354 gm)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Estimated using rigid body dynamics calculations.
[3] Low frequency response and system noise dependent on choice of external signal conditioning electronics.
[4] Typical.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±15 %) | 17 pC/lb | 3822 pC/kN | |
| Measurement Range (Compression) | ≤100000 lb | ≤444.8 kN | |
| Maximum Static Force (Compression) | 110000 lb | 489.3 kN | |
| Upper Frequency Limit | 35000 Hz | 35000 Hz | [2] [3] |
| Non-Linearity | ≤1 % FS | ≤1 % FS | [1] |
| Environmental | |||
| Temperature Range | -100 to +400 °F | -73 to +204 °C | |
| Temperature Coefficient of Sensitivity | ≤0.03 %/°F | ≤0.054 %/°C | |
| Electrical | |||
| Capacitance | 130 pF | 130 pF | [4] |
| Insulation Resistance | ≥1E12 | ≥1E12 | |
| Output Polarity (Compression) | Negative | Negative | |
| Physical | |||
| Preload | 33750 lb | 150.13 kN | |
| Stiffness | 131 lb/µin | 23 kN/µm | [4] |
| Size - Diameter | 2.950 in | 74.93 mm | |
| Size - Height | 0.670 in | 17.02 mm | |
| Size - Bolt Diameter | 1.5 in | 40 mm | |
| Size - ID (Hole Diameter) | 1.610 in | 40.89 mm | |
| Size - OD (Sensor) | 2.950 in | 74.93 mm | |
| Size - Sensing Surface | 2.660 in | 67.56 mm | |
| Weight | 12.5 oz | 354 gm | |
| Housing Material | Stainless Steel | Stainless Steel | |
| Sealing | Hermetic | Hermetic | |
| Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
| Electrical Connection Position | Side | Side | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| 080A82 | Assembly lubricant (for Series 201-207 force rings) | 1 |
| 081A17 | Mounting stud, 1 1/8-12 x 2.280", BeCu for Models 207C & 217B | 1 |
| 082B07 | Anti-friction washer for Models (M)207C & (M)217B | 1 |
| 083B07 | Pilot bushing for Models 207C & 217B | 1 |
Optional Versions
(M) Metric Mount
| Accessories: | |||
|---|---|---|---|
| Supplied | 080A82 | Accessory for Force - Torque Division Product | 0 |
| Supplied | M081A17 | Mounting Stud, M30 x 2.00 x 2.280, BeCu | 0 |
| Supplied | M083B07 | Pilot Bushing | 0 |
| Supplied | 082B07 | Anti-friction washer (for Models 207C and 217B) | 0 |
(P) Positive Output Polarity
| English | SI | |
|---|---|---|
| Output Polarity | Positive | |
(W) Water Resistant Cable
| English | SI | |
|---|---|---|
| Electrical Connector | Molded Integral Cable | Molded Integral Cable |
| Electrical Connection Position | Side | |


