PCB-208A12
Multi-purpose ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb, axial conn.
- Measurement Range: 100 lb (0.4448 kN)
- Sensitivity: (±15%)50 mV/lb (11240 mV/kN)
- Low Frequency Response: (-5%)0.001 Hz
- Upper Frequency Limit: 36000 Hz
- Temperature Range: -65 to +250 °F (-54 to +121 °C)
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±15 %) | 50 mV/lb | 11240 mV/kN | |
| Measurement Range (Compression) | 100 lb | 0.4448 kN | |
| Measurement Range (Tension) | 100 lb | 0.4448 kN | |
| Maximum Static Force (Compression) | 600 lb | 2.669 kN | |
| Maximum Static Force (Tension) | 500 lb | 2.224 kN | |
| Broadband Resolution (1) | 0.001 lb-rms | 0.004448 N-rms | [2] |
| Low Frequency Response (-5 %) | 0.001 Hz | 0.001 Hz | [3] |
| Upper Frequency Limit | 36000 Hz | 36000 Hz | [4] |
| Non-Linearity | ≤1 % FS | ≤1 % FS | [1] |
| Environmental | |||
| Temperature Range | -65 to +250 °F | -54 to +121 °C | |
| Temperature Coefficient of Sensitivity | ≤0.05 %/°F | ≤0.09 %/°C | |
| Electrical | |||
| Discharge Time Constant (at room temp) | ≥500 sec | ≥500 sec | |
| Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | ≤100 Ohm | ≤100 Ohm | |
| Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
| Output Polarity (Compression) | Positive | Positive | |
| Physical | |||
| Stiffness | 6 lb/µin | 1.05 kN/µm | [2] |
| Size - Hex | 0.625 in | 15.88 mm | |
| Size - Height | 1.17 in | 29.7 mm | |
| Weight | 0.80 oz | 22.7 gm | |
| Housing Material | Stainless Steel | Stainless Steel | |
| Sealing | Epoxy | Epoxy | |
| Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
| Electrical Connection Position | Axial | Axial | |
* All specifications are at room temperature unless otherwise specified.
Accessories
| Supplied | ||
| 080A81 | Thread lock adhesive (for Series 200) | 1 |
| 081B05 | Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder | 1 |
| 084A03 | Impact cap, convex (for Series 208) | 1 |
| M081A62 | Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu | 1 |
Optional Versions
(W) Water Resistant Cable
| English | SI | |
|---|---|---|
| Electrical Connector | Sealed Cable | |
PCB-208A12
